| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
07-06-2014, 02:55 PM
|
||||
|
||||
Fs: 67 firebird Subframe
I recently purchased an aftermarket frame. I would like to recover some of the cost by selling my stock frame and suspension
Comes with: Upper and lower control arms Springs from a 6cyl firebird, monroe shocks Spindles Master cylinder, prop valve disc/drum. Brake rotors, calipers, pads, dust Shields, caliper brackets. Converted 4 piston to single piston brakes. Steering components including pump, gearbox, lines, I started sand blasting the frame and control arms, but it needs some more to finish up. It needs new mounting plates welded in. And there are some cracks that need to be welded. $750 local pick up preferred. Thanks for looking, Ozzy.
__________________
463 Stroker Kit. ross pistons. h beam rods. eagle crank. 62 heads 72cc, port matched Performer RPM-850DP Auburn- 3.55 gear CC HR custom grind Last edited by *67firebird*; 07-06-2014 at 03:26 PM. |
|
#2
07-06-2014, 04:50 PM
|
||||
|
||||
|
The pictures below show the cracks on the Control Arm towers that need to be welded, both driver and passenger sides, corrosion on one of the body mounts, and of course the frame.
__________________
463 Stroker Kit. ross pistons. h beam rods. eagle crank. 62 heads 72cc, port matched Performer RPM-850DP Auburn- 3.55 gear CC HR custom grind Last edited by *67firebird*; 07-06-2014 at 05:35 PM. |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
