Industry Stuff new repro's, updates, other info.

test
Reply
 
Thread Tools Display Modes
  #1  
Old 04-07-2020, 12:13 PM
1969GPSJ's Avatar
1969GPSJ 1969GPSJ is offline
Junior Member
 
Join Date: Mar 2020
Location: Georgia
Posts: 18
Lightbulb Urethane motor Mounts, 1st gen Firebird, '69 Grand Prix, Some '60s A body and B body

In my internet searches, a few years ago I ran across these Polyurethane/Stainless motor mounts. They are perhaps similar to Butler's product (or also made by them for Butler?) While somewhat pricey, these should last much longer than the reproduction rubber mounts, and they eliminate the need for a turnbuckle because the steel parts interlock, but are isolated by the urethane. So a mid-point between solid mounts and the OEM style rubber mounts.



Interesting design, independent vendor perhaps worthy of support

https://polybushings.com/pages/2254.html

  #2  
Old 04-08-2020, 07:57 AM
grandam1979 grandam1979 is online now
Ultimate Warrior
 
Join Date: Feb 2005
Location: Ohio, Findlay
Posts: 1,031
Default

Been using these on my Firebird since 2012 no problems.

The Following User Says Thank You to grandam1979 For This Useful Post:
  #3  
Old 04-08-2020, 10:41 AM
1969GPSJ's Avatar
1969GPSJ 1969GPSJ is offline
Junior Member
 
Join Date: Mar 2020
Location: Georgia
Posts: 18
Default

Do you have HO manifolds or headers? Have you noticed if the Polyurethane has had any issues (presumably minor since you appear to be pretty happy with these mounts) with the heat from the exhaust?

Quote:
Originally Posted by grandam1979 View Post
Been using these on my Firebird since 2012 no problems.

  #4  
Old 04-08-2020, 06:33 PM
grandam1979 grandam1979 is online now
Ultimate Warrior
 
Join Date: Feb 2005
Location: Ohio, Findlay
Posts: 1,031
Default

I have the 3” long branch manifolds I will give them a good look over when I put it on the lift and see if I can get some pictures.

The Following User Says Thank You to grandam1979 For This Useful Post:
  #5  
Old 01-05-2022, 04:52 PM
chuckies76ta's Avatar
chuckies76ta chuckies76ta is offline
Ultimate Warrior
 
Join Date: Jun 2004
Posts: 2,377
Default

Just wondering if these are the same $10 mounts made in china with a bolt added through them and then marked up 20 times. I sent those guys emails about there product to new hear from them again. What a rip off. I think they were called Mighty mounts. Here they are. https://www.mitymounts.com/howtheywork.htm

__________________
Best so far: 10.28 at 130mph.1.46 60ft.
  #6  
Old 01-05-2022, 06:49 PM
1969GPSJ's Avatar
1969GPSJ 1969GPSJ is offline
Junior Member
 
Join Date: Mar 2020
Location: Georgia
Posts: 18
Default

Quote:
Originally Posted by chuckies76ta View Post
Just wondering if these are the same $10 mounts made in china with a bolt added through them and then marked up 20 times. I sent those guys emails about there product to new hear from them again. What a rip off. I think they were called Mighty mounts. Here they are. https://www.mitymounts.com/howtheywork.htm
Chuckies, If you look at the Pontiac listing for the mitymounts, you will notice that they do not list mounts for the early firebirds, and their listing is incorrect for the '69 Grand Prix and other Ponchos with the pre 1970 non 5 bolt mounting boss engines, so clearly they are not the same.

It would appear that although they "mitymounts" have a part number listing for the earlier engines, they do not stock them (or make them). The ones from Butler may be by mitymounts, but if so they are not the same as those from polybushings.com - the method of construction is very, very different, at least based on the descriptions and limited photos on the mitymounts website. There aren't any bolts going from the face of the mount through the poly on the ones made by polybushings, it would seem that they interlock the stainless parts of the mount, hold them in a jig/mold to keep them apart, and pour in the polyurethane, let them set, open the mold, clean them up and sell them. Look at the different pictures: mitymounts:


https://www.mitymounts.com/images/dynatechtop_3.jpg


verses polybushings



https://polybushings.com/images/PB2254.JPG


Very different indeed, and the polybushings are very, very beefy. I think Polybushings is a small US company making their parts in their own shop. I am not certain of this, but based on the information on their small website, and the focus of their product range, this would appear to be the case.

https://polybushings.com/index.html


Last edited by 1969GPSJ; 01-05-2022 at 07:10 PM.
The Following User Says Thank You to 1969GPSJ For This Useful Post:
  #7  
Old 01-06-2022, 03:13 AM
chuckies76ta's Avatar
chuckies76ta chuckies76ta is offline
Ultimate Warrior
 
Join Date: Jun 2004
Posts: 2,377
Default

Ya they do look different. I did purchase a set of these Mighty mounts back in the day when they were selling them. They are still on the car and working fine. But there just taking an offshore mount and putting a bolt through it. The polybushing look like a better mount.

__________________
Best so far: 10.28 at 130mph.1.46 60ft.
  #8  
Old 01-06-2022, 01:25 PM
1969GPSJ's Avatar
1969GPSJ 1969GPSJ is offline
Junior Member
 
Join Date: Mar 2020
Location: Georgia
Posts: 18
Default

Quote:
Originally Posted by chuckies76ta View Post
Ya they do look different. I did purchase a set of these Mighty mounts back in the day when they were selling them. They are still on the car and working fine. But there just taking an offshore mount and putting a bolt through it. The polybushing look like a better mount.
I agree, that's why I originally posted the item on the board. They really only do unique/unusual, fairly low demand items, like these mounts and some Mopar suspension and engine mount pieces. They are what I bought to use on my 428 when it goes back into my restored GP body. I am just hoping that the polyurethane won't terribly increase the NVH through the frame, since I also have Poly frame/body mounts.

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:07 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 

Cold Case Radiators

Cold Case Radiators is a Max Performance company that produces high end aluminum performance radiators at a price point that won't break the bank. Polished and stamped tanks. 2 rows of 1" tubes. Lifetime Warranty.

GTOG8TA.com

GTOG8TA.com is a Max Performance company that manufacturers parts for the 04-06 GTO, 08-09 G8, and 93-02 Firebird/Trans Am platforms.

Copyright © 2017