[Half-Inch Stud]

Originally Posted by Stan Weiss

I get 107 LSA with an advanced ICL using the TMC program I wrote with David. But lets use 106 LSA and 106 ICL and see what the old Desktop Dyno 2003 says. Stan

So 106-108 Sim appears moot. I don't know if DeskDrawyer Dyno has accuracy with LSA. Working the Dur up at 106 vs 108, vs 112 might reveal some resilience vs Falling off across RPM

[Stan Weiss]

Originally Posted by Half-Inch Stud

So 106-108 Sim appears moot. I don't know if DeskDrawyer Dyno has accuracy with LSA. Working the Dur up at 106 vs 108, vs 112 might reveal some resilience vs Falling off across RPM

Mark,
I don't know what it uses, but this is what it has to work with.

Stan

[Half-Inch Stud]

Duration is figured by a handheld calculator huh (on that screen).

[Stan Weiss]

Originally Posted by Half-Inch Stud

Duration is figured by a handheld calculator huh (on that screen).

Mark,
No you can enter the data on this screen.

Stan