| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
05-31-2003, 11:46 AM
|
|||
|
|||
I am changing the timing chain anf gears on my 74
455. I am having a problem with the cam sprocket. The service manual says to make sure the cam goes through the sproket to locate the pump eccrentic. When I do this the cam sprocket bottoms out against the cam retaining plate. Isn't there supposed to be some clearence between the sprocket and the block.? |
|
#2
05-31-2003, 11:46 AM
|
|||
|
|||
|
I am changing the timing chain anf gears on my 74
455. I am having a problem with the cam sprocket. The service manual says to make sure the cam goes through the sproket to locate the pump eccrentic. When I do this the cam sprocket bottoms out against the cam retaining plate. Isn't there supposed to be some clearence between the sprocket and the block.? |
|
#3
06-03-2003, 09:12 AM
|
||||
|
||||
|
Are you saying the gear bottoms out after the cam sticks out of the gear? Or bottoms before the gear sticks out?
Also is the cam gear on the correct way? johnta1 Pontiac Power RULES !!! www.wallaceracing.com 
__________________
John Wallace - johnta1 Pontiac Power RULES !!! www.wallaceracing.com Winner of Top Class at Pontiac Nationals, 2004 Cordova Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats KRE's MR-1 - 1st 5 second Pontiac block ever! "Every man has a right to his own opinion, but no man has a right to be wrong in his facts." "People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates |
|
#4
06-04-2003, 07:20 AM
|
|||
|
|||
|
The gear bottoms out after the end of the cam sticks out.
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
