FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
NEW 340cfm SD Performance ported Round Port 72cc Edelbrock Heads + North Wind Intake
Reluctantly selling these new 72cc heads and 4500 style KRE intake.
Ported by SD Performance: 340cfm round port E-heads with newer style combustion chambers. Titanium retainers. Port matched 4500 style Kauffman North Wind intake and water cross over. Heads have the Edelbrock center port name removed and front of heads engraving filled in so painting them these will look stealth. See flow sheet from Dave at SD Performance. New this set up runs at least $4100 plus tax/shipping --- AND YOU HAVE TO WAIT ABOUT 4 to 6 MONTHS! Looking to get just $3750 .....and you can have them in a week. That has to be worth something these days. Discounted FedEx shipping should run about $200. Located in SoCal if you are local and want to pick up. Paypal ok if sent via friends. Last edited by 65madgoat; 07-08-2021 at 03:17 PM. |
#2
|
|||
|
|||
Those look like nice heads. Thought I should mention though that the heads pictured have the original "bathtub" combustion chamber with the spark plug located near the intake valve. The newer "heart" chamber has the spark plug located near the exhaust valve and has a significantly different look. FWIW, I feel there is little performance difference in a race engine. We ran in the 7's with that design E head. Good luck with the sale.
|
#3
|
||||
|
||||
Oh my bad. Yes these are the ORIGINAL version combustion chamber not the new fast burn. I have heard this older style is better for larger porting efforts at least.
Last edited by 65madgoat; 07-08-2021 at 04:59 PM. |
#4
|
||||
|
||||
Quote:
There is something not right between these two posts. He says they are the ORIGINAL version combustion chamber, to me that would mean NOT "current design chambers". ?????????? Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#5
|
||||
|
||||
Quote:
Technically none of them are currently availble as we have twelve sets on order and are long past our original April 16 2021 expected date.... But that is a different subject. |
#6
|
||||
|
||||
Not a buyer here but dang they're purdy! Can't stop looking at them
__________________
Chris D 69 GTO Liberty Blue/dark blue 467, 850 Holley, T2, Edelbrock Dport 310cfm w Ram Air manifolds, HFT 245/251D .561/.594L, T400, 9" w 3.50s 3905lbs 11.59@ 114, 1.57/ 60' |
#7
|
||||
|
||||
Sure are some beautiful aluminum jewelry!
And yes Butler or Dave as SD Performance can machine these centers larger to be 87cc or so if needed and would make them the new heart shape design in the process if wanted. |
#8
|
|||
|
|||
was recently told by Dave at SD he doesnt do the heart shaped chambers anymore on the older heads.
|
#9
|
||||
|
||||
That is odd... just emailed with Dave the other day and said he could open it up. Now going to heart shape was assumed since that is what the website says, but not clear in his email.
From July 12th: "Yes I can open up the chambers to 87 or bigger cc’s. It does require having to cut the valve seats as part of the program is I trim the top of the seats about .050” to make the chamber larger so the installed height grows by about that much as well. To machine the chambers and cut the valve seats you’d be looking at $375.00" |
#10
|
||||
|
||||
These are set up with Howards springs # 98644 for use with solid lifters (and ok with a hydraulic roller cam)
|
#11
|
|||
|
|||
Nice set up... very similar to what I am putting together. Thats a great deal for whoever picks it up.
Good luck with the sale.
__________________
"The grass is not greener on the other side, its just fertilized with different $h!t" |
#12
|
|||
|
|||
sounds like going to the 87cc is required to do that. i asked about doing the heart shape chambers with a 315cfm porting to my new 72cc heads & he said he doesnt do the heart shape anymore on the 72cc heads, no mention of opening to 87cc to do it but maybe that was overlooked or probably my misunderstanding. heres a copy of his reply to me asking if he does that service still.
from feb/2021: "I no longer offer the heart shaped chamber option for the cast 72cc heads. Not enough demand and too time consuming to deal with and 95% of my customers are looking for larger chambers also Edelbrock has their own 72cc heart shaped chamber head now." |
#13
|
||||
|
||||
Opening the chamber to 87cc is required it appears and what he can do still.
|
#14
|
|||
|
|||
I do not believe he ever made heart shaped chambers out of 87cc E heads with the old chambers. Even then, its not as good as the new chamber.
|
#15
|
||||
|
||||
Regardless of new or old chambers... these heads and intake kick butt and are great and should be run as-is.
|
The Following User Says Thank You to 65madgoat For This Useful Post: | ||
#16
|
||||
|
||||
Fwiw..... The heads being advertised have current design chambers. For some applications they are considerably better than the CNC chambered heads.
Nice heads at a good price. GLWS |
#17
|
||||
|
||||
Edelbrock still casts and sells this original combustion chamber style head. So they are current in that regard as they still are made and sold.
They also make and sell a newer heart shaped fast burn combustion chamber CNC head with a different spark plug location which is more efficient and works with less total timing. As noted with this original style combustion chamber, which these are, they are better for larger porting efforts. |
#18
|
||||
|
||||
"Current" in my mind means on the shelf.
"Out of Stock" means "Not Available as you said". Wish you luck with whatever they send you, at some point. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#19
|
||||
|
||||
Intake manifold available separately! Heads still for sale too.
|
#20
|
||||
|
||||
Unsure if I am using these parts yet so get them while I still have them up for sale!
|
Reply |
|
|