FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
1964 Intake Bolt Set...
After many years, I'm returning the original Tri-power and heads to my '64 Goat, and taking off the '68 400 heads and intake. But, no where can I find the intake bolts for the 389. I'm hoping someone has a full set of original bolts in nice/good condition. Thanks. Gary in Tucson
|
#2
|
||||
|
||||
AMK shows a kit.
|
#3
|
|||
|
|||
I recently junked a couple of 64 326 2 bbl engines , but kept all the hardware including intake manifold bolts. So I should have a set if you think they might be same.. PM me.
|
#4
|
|||
|
|||
Thanks, JH, for answering. The '64, being the last year of the early intake pattern, tri-power intake has its own bolt set, so a bolt set from a 4 or 2 barrel intake will not do it. Again, thanks.
Gary in Tucson And thanks too, to 1_WILD_CAT for the tip on AMK... they do have an intake bolt set for 4 barrel and another for Tri-power, with good head markings and washers. This company may be the go-to place for fasteners for our Pontiacs and some others.... amazing what they have available. |
Reply |
Thread Tools | |
Display Modes | |
|
|