[chuckies76ta]

Hi: Anyone running 2" headers in a 68 Firebird?


I'm not having any luck finding them.


Thanks for any help.

[Bill Eveland]

Round port or d port?

These are round port

https://www.summitracing.com/parts/h...model/firebird

[chuckies76ta]

Round port.. Thanks

[chiefbigb]

I have a set of Indian adventure 2in headers that are coated by thermo tech. With a 8 chanel egt red alert system I may sell soon.

[ponjohn]

Call Maddog, get marks cell number. He is making them at his home garage.

[chuckies76ta]

Ok, Thank you

[AG]

Let me know if Mark is making them, I called last year and they were not. I have Maddog on my driver side and Hedman on the passenger side. Both 2".

[Scott Stoneburg]

I had Headmans on my 67 Firebird. They had a slip tube on the passenger side. They hung too low on the passenger side. I had to shorten every tube to bring it closer to the floor for ground clearance. But the Header bolts were all very easy to access and tighten.
I now have a set of MadDogs I bought from a member here. They fit great and no slip tubes. But the rear header bolt on the middle tubes on the drivers side is a pain in butt to tighten/loosen.

[charlie66]

I bought a set of 2" from Mad dog for my 74 Ventura and they fit perfect. Went right in with no mods..

[Rob B]

If anyone contact Maddogs and they will still make a set, let me know because I'll go for a set also. I have a set on my 74 ventura and they fit/work great, now I need a set for the wife's car because the old hedmans of mine I put on her car fit like crap(slip tube BS) and are getting thin from age. Last time I called they said no but she said a cousins brothers uncles father in law may make a set for if I called at a certain time to get a cell number...

[chuckies76ta]

I will call Mark today and let you all know. I also tell him others are interested.

Thanks
Charles

[ponjohn]

Originally Posted by chuckies76ta

I will call Mark today and let you all know. I also tell him others are interested.

Thanks
Charles

I called two months ago and the person answering the phone gave me his cell. I wrote it down on a post it. Have to see if I can find it.



I'd be down to order a set my ventura as well. I don't need 2" probably 1 3/4...What best for 600hp e-head combo?

[Bill Eveland]

Probably 1 7/8^^

[tom s]

Mark is retired but does a little custom work IF he has the jig.He got rid of the jig for first gen RA V headers.If what you want is not on the Maddog site then give Mark a try.Tom

[chuckies76ta]

I talked to Mark today and he says he is slowing down. He does most of his work come spring. He can still build headers.. PM me if your interested in his contact number. I let him know other guys are looking for headers.

Thanks
Charles