#41  
Old 05-30-2015, 11:55 PM
AzMike AzMike is offline
Member
 
Join Date: May 2015
Posts: 61
Default

I am looking for the rubber(ish) o-ring/gasket between the fuel tank and fuel nozzle for the rear facing 63 lemans gas tank.

Does anyone have one or a source for a substitute?

  #42  
Old 05-31-2015, 12:53 PM
mechanickeith's Avatar
mechanickeith mechanickeith is offline
Ultimate Warrior
 
Join Date: Dec 2002
Location: Phoenix, Az
Posts: 5,812
Default

Mike,,, good talking with you the other day & good to see the LeMans! Someone here should have what you are looking for

__________________
Keith Collier
61-63 Pontiac Tempest
Tech advisor
POCI.org
  #43  
Old 06-02-2015, 05:44 PM
AzMike AzMike is offline
Member
 
Join Date: May 2015
Posts: 61
Default

For what it's worth, I posted an introduction in the "projects" thread with pictures of the car, but the post is waiting for an admin to approve it. That has been over a week ago. Does this usually take this long?

  #44  
Old 06-02-2015, 06:05 PM
tom s tom s is offline
Ultimate Warrior
 
Join Date: Jan 2000
Location: long beach ca usa
Posts: 18,764
Default

I think the O rings is same as early chevy?Tom

  #45  
Old 06-09-2015, 01:00 PM
ta-69's Avatar
ta-69 ta-69 is offline
Senior Chief
 
Join Date: Jan 2007
Location: New Hampshire
Posts: 291
Default

Looking for a convertible top switch for a 63. Thanks Jim

  #46  
Old 06-09-2015, 08:21 PM
c5farmer's Avatar
c5farmer c5farmer is offline
Chief Ponti-yacker
 
Join Date: Nov 2009
Location: Jesup, Iowa 50648
Posts: 740
Default switch

I have a vert. top switch for sale. $75 plus $5.80 shipping.

  #47  
Old 06-09-2015, 08:35 PM
ta-69's Avatar
ta-69 ta-69 is offline
Senior Chief
 
Join Date: Jan 2007
Location: New Hampshire
Posts: 291
Default

PM sent

  #48  
Old 06-17-2015, 11:21 AM
63Banshee's Avatar
63Banshee 63Banshee is offline
Ultimate Warrior
 
Join Date: Oct 2001
Location: D/FW, TX
Posts: 2,901
Default

1962 dash trim Part # 4861989. Needs to be real nice condition.

  #49  
Old 06-25-2015, 08:33 PM
chuckolot chuckolot is offline
Member
 
Join Date: Aug 2014
Posts: 98
Default 4 cylinder camshaft

Looking for a good 4bbl 4 cylinder camshaft for a 62. Can be a 2bbl that I can send it out for a regrind if the price is good.

  #50  
Old 06-25-2015, 10:17 PM
beemergary's Avatar
beemergary beemergary is offline
Ultimate Warrior
 
Join Date: Mar 2003
Posts: 1,386
Default

Did you get my pm about that rear view mirror?

  #51  
Old 06-26-2015, 09:26 AM
rdtripn_rte66 rdtripn_rte66 is offline
Senior Member
 
Join Date: Jan 2002
Location: Monticello, Il
Posts: 152
Default

i sent a guy an email on a convt rv mirror. let me know if its one u need - if I dont hear back in a few days - Ill offer it up again.
pics i can send from my phone - using GFs comp atm....

__________________
Robin Triplett
2198020009 cell

63 Lemans convt. Present
63 Tempest HT bbw Parts car
  #52  
Old 07-02-2015, 01:01 PM
vin63's Avatar
vin63 vin63 is offline
Chief Ponti-yacker
 
Join Date: Nov 2007
Location: Chino Hills, CA
Posts: 784
Default Front Sway Bar Bushing Bracket

Just in case someone has a spare or a set of front sway bar bushing brackets laying around and not planning to use after a conversion. One of mine on the 1963 was rotted beyond repair. Thanks.

__________________
1963 Tempest Convertible

Pontiac-Powered Funny Car:
400 block, Littlefield 8-71 blower, Enderle injection,
custom blower intake, three-disc glide clutch, three-speed Lenco


  #53  
Old 07-02-2015, 08:41 PM
wojo1963 wojo1963 is offline
Member
 
Join Date: Mar 2013
Location: Cape Cod MA
Posts: 53
Default 63 Automatic tran pan gasket

I need a tranny pan gasket for my 63 - 336. Every supplier I have contacted says they only have a 14 bolt gasket where the 63 is a 16 bolt. Does anyone have a supplier for this gaskets. Thanks

  #54  
Old 07-02-2015, 09:09 PM
CONCRETEHART CONCRETEHART is offline
Senior Member
 
Join Date: Jul 2010
Location: mohawk, oregon
Posts: 136
Default gaskets

http://www.ebay.com/itm/310384817285...%3AMEBIDX%3AIT

  #55  
Old 07-02-2015, 10:05 PM
beemergary's Avatar
beemergary beemergary is offline
Ultimate Warrior
 
Join Date: Mar 2003
Posts: 1,386
Default

Could always buy some gasket material and make one.

  #56  
Old 07-03-2015, 01:48 PM
chuckolot chuckolot is offline
Member
 
Join Date: Aug 2014
Posts: 98
Default

Quote:
Originally Posted by beemergary View Post
Did you get my pm about that rear view mirror?
yeah sorry about the late response, i sent you an email

  #57  
Old 07-04-2015, 05:20 PM
Poncho_Villa's Avatar
Poncho_Villa Poncho_Villa is offline
Senior Chief
 
Join Date: Mar 2004
Location: Kamloops, B.C. Canada
Posts: 256
Default

Now here is an odd request on a hot summer day. I am after a heater motor for a '63. The number on it is 5044331 and probably spans other years and maybe other GM makes. Mine has seized. Anybody have one laying around after a heater delete?

  #58  
Old 07-04-2015, 06:48 PM
63Banshee's Avatar
63Banshee 63Banshee is offline
Ultimate Warrior
 
Join Date: Oct 2001
Location: D/FW, TX
Posts: 2,901
Default

Quote:
Originally Posted by Poncho_Villa View Post
Now here is an odd request on a hot summer day. I am after a heater motor for a '63. The number on it is 5044331 and probably spans other years and maybe other GM makes. Mine has seized. Anybody have one laying around after a heater delete?
I do.

  #59  
Old 07-04-2015, 07:57 PM
Poncho_Villa's Avatar
Poncho_Villa Poncho_Villa is offline
Senior Chief
 
Join Date: Mar 2004
Location: Kamloops, B.C. Canada
Posts: 256
Default

Hey Dave. I thought you might come through with one. I might have to take you up on that. Obviously I don't need it yet. I have a buddy who works in a rewind shop and he is going to take a look to see if he can loosen it up. He figures it might be the brushes. It hums but doesn't spin.

  #60  
Old 07-04-2015, 08:02 PM
63Banshee's Avatar
63Banshee 63Banshee is offline
Ultimate Warrior
 
Join Date: Oct 2001
Location: D/FW, TX
Posts: 2,901
Default

Quote:
Originally Posted by Poncho_Villa View Post
Hey Dave. I thought you might come through with one. I might have to take you up on that. Obviously I don't need it yet. I have a buddy who works in a rewind shop and he is going to take a look to see if he can loosen it up. He figures it might be the brushes. It hums but doesn't spin.
Let me know. I've got a couple pulled out during a/c installs.

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:23 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017