FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
71 decklid Sport emblem placement
Can anyone give me actual dimensions from the right corner for the two mounting holes for the Sport emblem on the decklid for a 71 (and I'd guess 70 was same placement) I'm doing a new deck lid now, and the lid it's replacing was also a replacement with an eyeballed placement after staring at pictures for days. hoping someone has a real one so I put them in the right spot.
Thanks! Dennis |
#2
|
|||
|
|||
3” and 4 3/8” from the right
3/4” from the bottom Sent from my iPhone using Tapatalk |
#3
|
|||
|
|||
thank you!
|
#4
|
|||
|
|||
just a follow up question, is that an optical illusion with the right hole higher than the left on your pic? you say bottom measurement is 3/4 to both holes? on my car right now it's definitely raised up on the right hole higher than the left but again, I have no way of knowing what was factory on the holes. when I push in the emblem on the left hole and just twist it down so the other pin lays at the same height, the emblem appears to sit slanted, but again, I'm used to seeing it more upright.
first pic: holes as they are on mine, and are within a 1/16" of your left to right measurements second pic: how my emblem currently sits third pic: how it would sit if both holes were same height from the bottom |
Reply |
Thread Tools | |
Display Modes | |
|
|