| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
09-01-2018, 12:53 PM
|
|||
|
|||
POA valve 68 GTO
How can you test a POA valve before installing on to evaporator ? Thanks
__________________
67428HO |
|
#2
03-25-2019, 09:59 PM
|
|||
|
|||
How does one know if this is good or bad on a system that has been off for years (by previous owner)?
|
|
#3
03-26-2019, 03:22 PM
|
|||
|
|||
|
Unfortunately, there really isn't a reliable way to test without installing and attempting a charge. There is one way to determine if it's NOT good, and that would be to block off the 3 ports on the side of the valve and see if you can blow through it. If you can, it's no good. If you cannot, there's a possibility it's still good. If it's not good, you can go to Original Air and they can rebuild yours as long as it's an original style valve. They also sell valves to eliminate them.
|
|
#4
03-26-2019, 06:53 PM
|
||||
|
||||
|
|
|
#5
03-26-2019, 08:58 PM
|
||||
|
||||
|
I ended up going this route. Eliminate all doubt and headaches. https://www.shopcenturyautoair.com/s...it_POAELM.html
__________________
"I know just enough to keep me here, but not enough to get me out" |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
