FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Positive Rake Angle/Ride Height on Small Tire Ladder Bar Bracket Car?
Hey Everybody,
I have a 4 degree positive rake angle on the ride height and wanted opinions . Thanks, Craig Still launching at 4,500 - 2-step with 5,000 still to grab. Turbo 400 4.11 Pro gears with MT 10.5w x 28 slicks Front suspension: Comp Engineering single adjustable Adjusted to 90/10 settings 5 x 18 #180 springs Low friction control arm bushings and ball joints Front end limiters set to no limiting Total Race Weight 3440 Front weight 1860 Rear weight 1580 Percentage Basis Front to rear 55% to 45% Rear suspension: Full length Competition engineering adjustable ladder bars Bottom hole lowest front heim end setting Right bar - slight preload “5 #150 lbs - springs with spring jacks Comp Engineering Double Adjustables Pinion angle 2 degrees negative MT 10.5w x 28 slicks with tubes at 14 pds cold - best runs Thanks Guys, Craig |
#2
|
||||
|
||||
Are you close to Fairfax Ia? Brandospeed. Brandon may be able to help.
|
#3
|
||||
|
||||
Brandospeed guys are amazing!!
|
#4
|
||||
|
||||
Ladder bar angle matching the rocker angle is a good starting point.
But video of the launch will tell you everything you need to know. |
Reply |
|
|