#1  
Old 02-05-2022, 01:37 PM
6d7gto 6d7gto is offline
Ultimate Warrior
 
Join Date: Jul 2006
Posts: 1,338
Default Looking to buy used original centerlink from a 64-70 A body

Any condition okay. Will use them for research and experimenting on...it will never be mounted in a car.

  #2  
Old 02-06-2022, 10:32 AM
ROCKETMAN269V's Avatar
ROCKETMAN269V ROCKETMAN269V is offline
Junior Member
 
Join Date: Jan 2008
Location: South Central Florida
Posts: 29
Default

I have used steering linkage for A bodies. Where are you located? Thanks, Bob.

  #3  
Old 02-07-2022, 12:07 AM
6d7gto 6d7gto is offline
Ultimate Warrior
 
Join Date: Jul 2006
Posts: 1,338
Default

Quote:
Originally Posted by ROCKETMAN269V View Post
I have used steering linkage for A bodies. Where are you located? Thanks, Bob.
Southern California. I will pay all shipping costs if that seems too far to send parts like center links. If you have more than one for sale I will consider all you have. Just found out they can be rebuilt. But also interested in bent bars for the end link inner parts. The bent ones can be cut with a cut off grinder to fit smaller flat rate USPS boxes where weight is not an issue.

Robert

6d7gto@gmail.com

  #4  
Old 02-07-2022, 10:12 AM
ROCKETMAN269V's Avatar
ROCKETMAN269V ROCKETMAN269V is offline
Junior Member
 
Join Date: Jan 2008
Location: South Central Florida
Posts: 29
Default

Email sent.

  #5  
Old 02-20-2022, 10:16 PM
6d7gto 6d7gto is offline
Ultimate Warrior
 
Join Date: Jul 2006
Posts: 1,338
Default

I haven't heard back from you Bob. Did you forget me? If shipping is a problem, just cut off the ends of the center link with a cut off wheel. Will pay up to $50/each end for original parts that have good threads on the tapered stud.

  #6  
Old 02-21-2022, 11:54 AM
ROCKETMAN269V's Avatar
ROCKETMAN269V ROCKETMAN269V is offline
Junior Member
 
Join Date: Jan 2008
Location: South Central Florida
Posts: 29
Default

Robert, I didn't forget. Initially you posted "Looking to buy used original centerlink from a 64-70 A body" After I responded by email you told me that you needed them labeled by the year that they were off of, with a preference for '66-'67. Mine are not marked as such, so I didn't pursue it. I apologize for not updating you.

  #7  
Old 02-21-2022, 09:32 PM
6d7gto 6d7gto is offline
Ultimate Warrior
 
Join Date: Jul 2006
Posts: 1,338
Default

Quote:
Originally Posted by ROCKETMAN269V View Post
Robert, I didn't forget. Initially you posted "Looking to buy used original centerlink from a 64-70 A body" After I responded by email you told me that you needed them labeled by the year that they were off of, with a preference for '66-'67. Mine are not marked as such, so I didn't pursue it. I apologize for not updating you.
I apologize for the confusion. If it is an original center link from a Pontiac A body, I would like to buy just the ends. Here is a thread to show what I need them for:
https://forums.maxperformanceinc.com...d.php?t=856393

#6 post by gto4ben has photos of what original parts look like. These are from the smaller diameter A body center links with 13/16" diameter. These have the smaller studs shown in photo 2. Photo 1 shows what the end cap looks like after the capture ring (looks like a washer) was ground down. Original center links have date codes stamped in them which is evidence they are original production units. I'm guessing other GM center links of that era (with the smaller diameter) utilized the same set up and parts for the end links. So if you're not sure if they are from a Pontiac, I would still be interested in buying just to take them apart.

  #8  
Old 03-05-2022, 10:55 PM
6d7gto 6d7gto is offline
Ultimate Warrior
 
Join Date: Jul 2006
Posts: 1,338
Default Need original center links from 64-70 A body

Still looking for center link...parts or whole. Will pay $50 or more per side depending on condition.

  #9  
Old 04-10-2022, 03:35 AM
eric5568 eric5568 is offline
Suspended
 
Join Date: Apr 2022
Posts: 0
Default

Hello


Sent from my iPhone using Tapatalk

  #10  
Old 04-13-2022, 12:00 PM
importsmasher's Avatar
importsmasher importsmasher is offline
Ultimate Warrior
 
Join Date: Sep 2006
Location: Western Tennessee
Posts: 1,266
Default

Would other A-bodies be the same? I have a 64 Skylark parts car that I could pull the center link off of.

Importsmasher

__________________
Scott Baggiore

66 GTO convertible 389/4 speed (parents bought new)
73 Firebird Formula 400/4 speed
74 GTO 455/4 speed
74 Grand Am
  #11  
Old 04-13-2022, 09:55 PM
6d7gto 6d7gto is offline
Ultimate Warrior
 
Join Date: Jul 2006
Posts: 1,338
Default

Quote:
Originally Posted by importsmasher View Post
Would other A-bodies be the same? I have a 64 Skylark parts car that I could pull the center link off of.

Importsmasher
Not sure...but I found what I needed already. Thank you for responding.

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:47 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017