FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
IGN spade in fuse box has no power
Trying to wire up an HEI distributor. Went to connect a new 12 gauge wire to the IGN spade terminal in the fuse box and found it has no power with key on or when trying to start. Any idea what I should check first to get power back to that terminal?
__________________
1971 Trans Am - Sold 1977 Can Am - Sold 2002 Trans Am Firehawk - Sold 2004 GTO - Sold 2006 GTO - Sold 1970 GTO - Sold 1972 Trans Am - Sold 1970 Trans Am - Current Project |
#2
|
|||
|
|||
Learned something new today, the fuses adjacent to the open spades is what sends power to them. I tested the fuses with a test light and one side showed power and the other side did not. Replaced that fuse and the IGN spade now has power.
Hope this helps someone else in the future.
__________________
1971 Trans Am - Sold 1977 Can Am - Sold 2002 Trans Am Firehawk - Sold 2004 GTO - Sold 2006 GTO - Sold 1970 GTO - Sold 1972 Trans Am - Sold 1970 Trans Am - Current Project |
#3
|
|||
|
|||
Glad you caught that. I had the same issue a couple years ago and was going to mention that.
|
Reply |
|
|