FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Remove Heater Core from 1970 GP a/c?
Hi, I have a 1970, Grand Pix, A/c car, Restoration project. rebuilt the engine and tranny then started the car for the first time, in 20 years. When I started the car all systems looked good, went to turn off the car, there was a pool of anti-freeze on the passenger floor. Is there any literature, or manual or suggestions to remove the heater core that doesn't include the use of a hammer?
Dan |
#2
|
||||
|
||||
Easy to remove the heater core...just tedious...here is an article for a Skylark will apply to your car.
http://www.buickperformance.com/heatercore.htm |
#3
|
||||
|
||||
Thanks for the article George. It is very much appreciated!
Dan PS: i'll keep you posted. |
#4
|
||||
|
||||
I replace the heater core in my 69 Grand Prix .
I was intimidated by the project but it actually wasn't that difficult . Take your time , You'll get it ...
__________________
69 Grand Prix 428 H.O. loaded "J" 11.51 @ 116 |
#5
|
||||
|
||||
Thanks for the words of encouragement!
cutrone,
Thanks for the words of encouragement! I can't believe I didn't take a look at the heater core before I started to restore the car?!! My car is the same colour combination as your, hope mine looks that good! Dan |
Reply |
|
|