[jimrws6]

Hi guys. I am new here so bear with me. I have a 69 GTO. I would like to replace or have my existing Quadrajet rebuilt. I want it to "look" good but most of all I want it to run right. Who can do the best job? I don't mind paying for top quality work. Just don't want to get a carb that has been "recolored" with a "kit" installed. Who does this work and what all is done to rebuild it right with proper flow and leak down testing. Thanks, Jimmy Rhodes

[jimrws6]

Hi guys. I am new here so bear with me. I have a 69 GTO. I would like to replace or have my existing Quadrajet rebuilt. I want it to "look" good but most of all I want it to run right. Who can do the best job? I don't mind paying for top quality work. Just don't want to get a carb that has been "recolored" with a "kit" installed. Who does this work and what all is done to rebuild it right with proper flow and leak down testing. Thanks, Jimmy Rhodes

[Rocky Rotella]

Contact Cliff Ruggles at [email protected] about his Q-jet preparation. Cliff's QJ's operate flawlessly and come custom calibrated to match your combination's needs. Reasonable prices and top quality work. Check for past posts raving about his work.

[jimrws6]

Rocky, Thanks for the tip on Cliff. He has already replied to my email. I saw carbking reply to a post as well on another subject. Since I am new to the board I don't know anyone and what their areas of expertise are. Don't want to step on anyone's toes! Does carbking rebuild/fix carbs as well? Thanks, Jimmy

[Rocky Rotella]

Jon Hardgrove (carbking) owns The Carburetor Shop in Eldon, MO. Jon is also very good with Q-jets. Jon limits himself to 1974-earlier Q-jets while Cliff will do all years.

Either are an excellent choice, just depends what carb and what you're looking for.