| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
Can someone tell me what side of the coil the condensor is wired to? The car is a 70 GTO with a points distributor but I have converted it to a Pertronix unit. The condensor I am talking about is NOT the one underneath the cap & rotor. It is the condensor that attaches to the coil bracket.
Buy a GOAT....they eat anything!
__________________
Buy a GOAT....they eat anything! |
|
#2
|
|||
|
|||
|
Can someone tell me what side of the coil the condensor is wired to? The car is a 70 GTO with a points distributor but I have converted it to a Pertronix unit. The condensor I am talking about is NOT the one underneath the cap & rotor. It is the condensor that attaches to the coil bracket.
Buy a GOAT....they eat anything!
__________________
Buy a GOAT....they eat anything! |
|
#3
|
||||
|
||||
|
You are talking about the radio suppression capacitor. I'm positive it goes on the + terminal of the coil.
__________________
So long, farewell. |
|
#4
|
||||
|
||||
|
That's correct. The condenser (capacitor; modern terminology) inside the distributor connects to the (-) side of the coil. Connecting the external capacitor to the (-) side also, will cause ignition problems. As mentioned above, the external capacitor is the radio suppression capacitor.
Regards, George p.s. somehow my post ended up ahead of Held-for-Ransom's instead of after it.
__________________
"...out to my ol'55, I pulled away slowly, feeling so holy, god knows i was feeling alive"....written by Tom Wait from the Eagles' Live From The Forum |
| Reply |
|
|