[GILLIGAN]

I SEND CARBS TO CLIFF RUGGLES
??? DISTRIBUTORS ?????

[johnta1]

I don't understand what you're wanting?

Do you need a distributor worked on?
Wanting to verify what a distributor came from?

Or?

[bigborehunter]

If it's part number checking for applications you need. John's website Wallace Racing is great for that. He helped me very much when I did an article on verifying 1975 and 1976 Trans Am 455 HO engines. It's coming out on bandittransamclub site in a few days.

[Lloyd-TX]

He needs someone - better aquainted with distributor stampings than myself - to authenticate a couple of '69 Ram Air distributors.

[GILLIGAN]

Originally Posted by johnta1

I don't understand what you're wanting?

Do you need a distributor worked on?
Wanting to verify what a distributor came from?

Or?

I WOULD LIKE TO SEND DISTRIBUTORS TO A SPECIALIST WHO CAN VERIFY THAT STAMPINGS/PARTS ARE AUTHENTIC=NOT RESTAMPED/INCORRECT PARTS
CLIFF R. DOES THIS ON CARBS FOR ME=PHS DOES THIS ON CARS FOR ME
HOPE THIS CLARIFIES
THANK YOU LLOYD FOR ASSISTING ME IN QUEST
THERE IS BOUND TO BE A DISTRIBUTOR AUTHENTICATOR

[johnta1]

Thanks, I see what you need now.

I don't know of anyone specifically, but there are a lot of knowledgeable people here.


I do know that the distributor body has 'rings' or 'striations' going around the main body from the factory. To 're-do' a number, these would have to be ground out to get rid of the old original number.

So, no 'rings' probably re-stamped.

If you need to know what a distributor number is for, I might be able to help.

[DODGER]

post some pics. of the numbers and dates. as everybody here can help with the dist.
I have sold lots of RA dist. and have lots of the date codes and can tell you if the date is correct. ie. 941, 952, 970, 2012 etc. the 970 was used on late after jan. 1969 WS and some WT motors.
all my dist work is done by ignition engeering out in CA. and they do superb work. they are doing 2 970 for me right now. a march and may dates. and I have a jan. on the way.

[GILLIGAN]

THANK YOU FOR PASSING "THE KNOWLEDGE"

[GILLIGAN]

Originally Posted by DODGER

post some pics. of the numbers and dates. as everybody here can help with the dist.
I have sold lots of RA dist. and have lots of the date codes and can tell you if the date is correct. ie. 941, 952, 970, 2012 etc. the 970 was used on late after jan. 1969 WS and some WT motors.
all my dist work is done by ignition engeering out in CA. and they do superb work. they are doing 2 970 for me right now. a march and may dates. and I have a jan. on the way.

clewwho40 EBAY SELLER WITH DIST. = HAS A BUNCH POSTED =HAVE REQUESTED HIM TO SEND PICS. OF 2 I WANT/HAS===hmmmm
THANKS GUYS
WEE WILL SEE!!!!

[6d7gto]

Stay clear of clewwho and wilma.

[GILLIGAN]

Originally Posted by 6d7gto

Stay clear of clewwho and wilma.

thank you what dealings did you have or know of with them?
clewwho40=ebay seller
prompt on stating that he has
1111952&1111941 with date codes=
ready to ship/cards accepted
BUT NO RESPONSE TO PIC. REQUEST!!!hmmmmmmmmm?

[6d7gto]

I haven't dealt with them personally but both dealers I mentioned sell re-stamped distributors on Ebay. Just thought you should know.

[GILLIGAN]

Originally Posted by 6d7gto

I haven't dealt with them personally but both dealers I mentioned sell re-stamped distributors on Ebay. Just thought you should know.

SIR THANK YOU SO MUCH-I USED TO COLLECT "UNOPENED" BASEBALL CARD PACKS
FROM THE 50'S="RESEALS" HIT THE MARKET AND WRECKED THE HOBBY FOR ME AND MY SON=I NOW SEE THIS DECIET IN CAR HOBBY=I BUILD PONTIACS FOR FUN WITH FACTORY PARTS SO I MUST BE SKEPTICAL OR THE NEXT GUY GETS TRASH=

[engineer]

please remove the =caps= in your threads. thks

[Judge273]

Here is a RA IV distr for a 69 for reference. Note: the mill marks and font difference.

[GILLIGAN]

Originally Posted by Judge273

Here is a RA IV distr for a 69 for reference. Note: the mill marks and font difference.

GOD BLESS YOU SIR/I SHALL KEEP THIS PIC. FOR REFERENCE.
MAY YOUR POSIS BE LONG & YOUR WIGWAM SAFE

[Uncle Judge]

Originally Posted by GILLIGAN

I SEND CARBS TO CLIFF RUGGLES
??? DISTRIBUTORS ?????

If you are looking for a legit distributor to purchase or need one indentified, I can help with either. Jeff

[GILLIGAN]

Originally Posted by Uncle Judge

If you are looking for a legit distributor to purchase or need one indentified, I can help with either. Jeff

bless ya man! fer starters 1111952

[Uncle Judge]

Originally Posted by GILLIGAN

bless ya man! fer starters 1111952

That would be a 1969 RAIII Firebird or T/A unit. I realize that the parts books show the 1111952 application being for a 69 GTO or Judge as well. However, my experience has shown the 1111970 to be far more common in the "A" body and the 1111952 in the "F" body. I did sell a 1952 about 10 months ago. That is one of the hardest distributors to find next to the 1970 RAIV 1112011. This rarity is due to the fact that the 1111970 appeared in far more vehicles than did the 1111952.

[GILLIGAN]

Originally Posted by Uncle Judge

That would be a 1969 RAIII Firebird or T/A unit. I realize that the parts books show the 1111952 application being for a 69 GTO or Judge as well. However, my experience has shown the 1111970 to be far more common in the "A" body and the 1111952 in the "F" body. I did sell a 1952 about 10 months ago. That is one of the hardest distributors to find next to the 1970 RAIV 1112011. This rarity is due to the fact that the 1111970 appeared in far more vehicles than did the 1111952.

my findings agree
in search of
1111952-& 7029273
what a hunt this has been!!!!
I AM GRATEFUL/JUST PART OF A REWARDING HOBBY