[Mike Pemberton]

Help again!!!

Gardner exhaust will make factory replacements, motor to rear bumper if we can get them a set of head pipes for a 67 GP 428 HO with cast iron long branch manifolds. They already have the muffler back configuration done and in place.

Does anyone out there have a set in any condition?

All they need to be is in a stock configuration, 2.25" from the exhaust manifolds back to the mufflers, can be dented, rusted, having holes etc, as long as we can get a true measurement and bend configuration.

Need both sides.

I will pay you for them (cash to you) and pay the shipping to Gardner if I can find some good units.

These are for a 67 GP 428 HO motor with cast iron long branch manifolds. By doing this we can all benifit by having a correct factory replacement system available for our cars.

Please do not hesitate to call me anytime with any ideas or leads.

I know RARE has a set that will work but as you know Gardner is the GTO National Show winners choice for extreme correctness to a stock configuration.

Any and all help with this project will be appreciated.

Thanks again,

Mike Pemberton
67 GP Hurst Convertible
510-501-6299 cell #
[email protected]