 |
|
| Non Pontiac Motors in Pontiacs includes factory 403,305,350 Chevy, Buick V6, Also Pontiac Motors in non-Pontiacs! |
| Reply |
|
|
Thread Tools | Display Modes |
|
#1
02-17-2009, 10:54 PM
|
||||
|
||||
428 into a 64 c-10
well i am restoring a 64 c-10 and i have a spare 428 already to go so its going in. Has anyone done this? If so got any pics i could see. It will be about 520 hp or so. what degree does the block need to be angled? thanks isaac
__________________
72firebird 3800# 496 316cfm eheads, 11.1:1 compression, custom solid roller, victor 4500 intake port matched, 1050 dominator, continental converter flash 4400 stall. 3.73. 2 inch headers with 3.5 with x to mufflers reduced to 3 inch full exhaust. mallory 250 fuel pump, cal tracs with split monos ..Pump gas 91 octane. |
|
#2
02-18-2009, 01:19 AM
|
|||
|
|||
|
Do it. You'll like it. I have a 69 c-10. Stock 400, chevy 400 trans with adaptor and 4.10 gears. I have 11" converter to install but right now I got sidetrack into another project, mostlly B-man fault. I used motor mounts from a ventura and made my own brackets. Hope this helps.
|
|
#3
02-18-2009, 05:16 AM
|
||||
|
||||
|
That would be sick! Sleeper or what? haha
__________________
Robert Lewis 1959 Star Chief 4 Dr HT dual quad 389 4 speed 1962 Pontiac Plain Jane Catalina http://pontiac-59.com/ |
|
#4
04-20-2009, 10:51 PM
|
||||
|
||||
|
well i finaly got arount to making brackets. I will post some pics as soon as i can get ahold of a digital camera.
__________________
72firebird 3800# 496 316cfm eheads, 11.1:1 compression, custom solid roller, victor 4500 intake port matched, 1050 dominator, continental converter flash 4400 stall. 3.73. 2 inch headers with 3.5 with x to mufflers reduced to 3 inch full exhaust. mallory 250 fuel pump, cal tracs with split monos ..Pump gas 91 octane. |
|
#5
04-21-2009, 12:34 AM
|
||||
|
||||
|
Very cool, i have always wanted to put a Pontiac motor in a GM truck.
|
|
#6
04-21-2009, 08:08 PM
|
||||
|
||||
|
I have been told that the frame mounts for the 6 cyl chevy work great with the early A-body engine mounts. I have not done it, only been told by others who have.
__________________
Dave "Big Injun" Anderson [email protected] www.4mypontiac.com For GTO Celebration items click the tile coaster. 
|
|
#7
04-23-2009, 10:00 PM
|
||||
|
||||
|
i had the straight six motor mount perches that came with the truck but i have never liked modifing old brackets. I wanted a cleaner look so i started from scratch. still gotta get ahold of a digital camera.
__________________
72firebird 3800# 496 316cfm eheads, 11.1:1 compression, custom solid roller, victor 4500 intake port matched, 1050 dominator, continental converter flash 4400 stall. 3.73. 2 inch headers with 3.5 with x to mufflers reduced to 3 inch full exhaust. mallory 250 fuel pump, cal tracs with split monos ..Pump gas 91 octane. |
|
#8
02-28-2010, 06:14 PM
|
||||
|
||||
|
updated pics
Well after a long while i finaly installed the motor and trans! Instead of building up my 428 i bought a complete running 461 stroker with a built transmission for $2,000. It will be a while before its up and running, i still have to finish the fuel system and wire the truck. I have to learn how to resize the pics and then i will upload them.
__________________
72firebird 3800# 496 316cfm eheads, 11.1:1 compression, custom solid roller, victor 4500 intake port matched, 1050 dominator, continental converter flash 4400 stall. 3.73. 2 inch headers with 3.5 with x to mufflers reduced to 3 inch full exhaust. mallory 250 fuel pump, cal tracs with split monos ..Pump gas 91 octane. |
|
#9
03-01-2010, 12:03 AM
|
||||
|
||||
|
pics
lets see if this works
__________________
72firebird 3800# 496 316cfm eheads, 11.1:1 compression, custom solid roller, victor 4500 intake port matched, 1050 dominator, continental converter flash 4400 stall. 3.73. 2 inch headers with 3.5 with x to mufflers reduced to 3 inch full exhaust. mallory 250 fuel pump, cal tracs with split monos ..Pump gas 91 octane. |
|
#10
03-01-2010, 12:35 AM
|
||||
|
||||
|
They'e a little small but they worked
__________________
Robert Lewis 1959 Star Chief 4 Dr HT dual quad 389 4 speed 1962 Pontiac Plain Jane Catalina http://pontiac-59.com/ |
|
#11
04-02-2010, 08:47 PM
|
||||
|
||||
|
Looking good!!!
|
|
#12
04-04-2010, 12:19 AM
|
||||
|
||||
|
Nice "clean"-looking truck- you're gonna' have fun!
 Have you thought about what type of rear suspension yet?
__________________
Anybody else on this planet campaign a M/T hemi Pontiac for eleven seasons? ... or has built a record breaking DOHC hemi four cylinder Pontiac? ... or has driven a couple laps of Nuerburgring with Tri-Power Pontiac power?(back in 1967) ... or has a Pontiac born the same year as Jim Wangers? (1926}
|
|
#13
07-29-2010, 10:34 PM
|
||||
|
||||
|
getting closer to starting it, have to finish up the cooling system and ignition, I just bought "coy" c-5 rims, the flat black ones, they look awsome on the truck!! Pictures soon to follow
__________________
72firebird 3800# 496 316cfm eheads, 11.1:1 compression, custom solid roller, victor 4500 intake port matched, 1050 dominator, continental converter flash 4400 stall. 3.73. 2 inch headers with 3.5 with x to mufflers reduced to 3 inch full exhaust. mallory 250 fuel pump, cal tracs with split monos ..Pump gas 91 octane. |
|
#14
08-03-2012, 07:42 PM
|
||||
|
||||
|
Any update on the build?
|
|
#15
09-05-2013, 08:35 AM
|
||||
|
||||
|
Got the truck up and running just need to finish the drivetrain and brakes. Moving along really slow but ill post pics soon.
__________________
72firebird 3800# 496 316cfm eheads, 11.1:1 compression, custom solid roller, victor 4500 intake port matched, 1050 dominator, continental converter flash 4400 stall. 3.73. 2 inch headers with 3.5 with x to mufflers reduced to 3 inch full exhaust. mallory 250 fuel pump, cal tracs with split monos ..Pump gas 91 octane. |
|
#16
09-05-2013, 06:33 PM
|
||||
|
||||
|
Just came across your thread. I have done it twice so far. First was a 74 GMC and I put the large bolt pattern snowflakes on it. The second one was a 69 long box GMC. Put a 455 in that one. The wife enjoyed the one wheel peal on that one. Your project sure looks like a class act.
__________________
|
|
#17
09-07-2013, 08:00 PM
|
||||
|
||||
|
Quote:
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
