[mwritter]

Time to move some parts inventory:

- 64 GTO/Lemans taillight housings and gas door (mildly pitted, good for cores) - $150
- 64 GTO valve covers (late, two sets one is like new, the other is driver condition) - inquire
- 64 GTO/Lemans/Tempest AC dash housing (no gauges, driver condition) - $100
- 64 GTO/Lemans/Tempest AC dash controls (one-year only part) - $200
- 64/65 GTO/Lemans/Tempest wiper arms (pitted chrome) - $15
- 64/65 GTO/Lemans/Tempest heater/fan controls (one nice, the other is driver shape) - $25 / $50
- 64/65 GTO/Lemans/Tempest rally clock (untested) - $35
- 64/65 GTO/Lemans/Tempest wiper motor (needs rebuild) - $10
- 65 GTO/Lemans/Tempest spring ring positive battery cable (new in package) - $30
- 65 GTO dash housing (nice shape, new woodgrain) - $100
- 65 GTO/Lemans Header and filler panels (some rust on filler panel, header is nice) – $150
- 65 GTO/Lemans front grilles (decent chrome, good for a driver) – $75
- 65 GTO/Lemans taillight grilles (rough, probably for parts/custom only) - $10
- 65 GTO/Lemans/Tempest taillight housings (each would need work) - $5 + ship
- 65 GTO/Lemans/Tempest taillight housings (driver needs minor work, passenger excellent) - $75
- 65 GTO/Lemans/Tempest front fender extensions (one missing a tab) - $75
- 65 GTO/Lemans Tailpanel (pitted, driver or rechrome) - $75
- 65 GTO/Lemans/Tempest standard hubcaps (nice shape) - $75
- 65 Lemans/Tempest hood (very nice shape, painted Fontaine Blue) – pickup only - $100
- 65 Lemans/Tempest hood (decent shape, just painted Mayfair Maize) – pickup only - $50
- 66-7 Headlight bezels, 2 sets (all need a rechrome, two have minor damage) - $25/all or $10/ea
- 67 header panel, very rusty but has trim - $25
- 68 non-tinted rear side glass (need to check on which side) - $50, pickup only
- 68-70 GTO hood scoops (original metal pieces, good shape) - $100
- 68-up (I believe) Carter Muscle Car Series Mechanical Fuel Pump (brand new, has return) - $40
- 70 GTO remote mirror (complete, needs rechrome) - $30
- 70 GTO dash block-off plate (replaced with a tach) - $15
- 12” used booster and master cylinder from a ’72 - $75
- Alpine F320 40x4 and 100x1 5-channel amp and JL Audio 10W0 w/enclosure (perfect small setup for a muscle car) - $200
- ARP Pontiac black 12pt engine bolt kit (new, unopened) – $75
- 14” original ’65 steel wheels with 1” whitewalls (driver condition, wheels could use paint) – pickup only
- Lots of stainless and aluminum trim, mostly 1964-65, some ’66-7 - inquire
- Used Crane cam and lifters (specs here: http://www.cranecams.com/?show=brows...tType=camshaft) - $50

I will take offers on any of the above, especially on multiple items. I just listed prices as best as I could per forum rules. Pictures of most parts are available by email, just please be patient due to the number of items listed and my schedule. Shipping is not included in asking price, but is negotiable.

[mwritter]

TTT

[mwritter]

TTT - willing to listen to offers

[mwritter]

TTT

[mwritter]

Still have most of this stuff, willing to take reasonable offers. Can deliver these to the East Coast Regionals in Mahwah, NJ next Saturday.

[ron cozzo]

Matt, can you send some pics of the 64 a/c dash bezel and the 64 a/c controls. Any broken gauge mounting bosses or cracks on the dash? Condition of the chrome on the controls?

[email protected]

Thanks.

[ron cozzo]

Also need a nice passenger side grille for a 64.

[my62toy]

I know this is an old posting and perhaps all is gone. I'm looking for a 65 dash bezel in good condition. Do you have one? If so, can you send me a few pictures to [email protected] and the price? Thanks.

[ITSBACK]

You did not say how much for the steel wheels, only pickup.

[mwritter]

I can no longer edit the original post, it's too old. The steel wheels were sold some time ago, most of the other parts are still available.

[GOAT490]

I am looking for the stainless steel that goes on the outside/bottom of the side windows for a 65GTO.

Thanks,
PHILLYGOAT

[mwritter]

Phillygoat - Sedan, hardtop or convertible? Most of that trim is aluminum, only the converts got stainless. I have lots, let me know exactly what you need. Sounds like you need the doortop reveal moldings, I think the only sets I have left are for a sedan/post.

[MDSHARK81]

I have a 65 Post coupe and may be interested in the SS/alum trim around the door window glass, as mine has some scratches, if yours are better will save me from sending them out, possibly take the trim for the rear windows as well if in nice shape. Also what type of hub caps do you have for 65 (dog dish,custom,deluxe,wire,etc...)

[mwritter]

MDSHARK81 - I definitely have at least one complete set of post window trim, maybe two sets or more. I'll put together the nicest set I have and take some pics for you. I have 3-4 sets of rear window trim and I will do the same. I had several sets of hub caps, but I believe the only set I have left are the deluxe, but I will double-check.

[MDSHARK81]

PM Sent thx

[GOAT490]

I have a HT. If you find any, please email me some pics/prices.

Thanks,
PHILLYGOAT

[MDSHARK81]

Any luck finding a nice set of alum. trim for around door & rear window for 65 post coupe? would appreciate pics & price.

[mwritter]

I apologize for not responding to all of the parts requests sooner - i was not really in a selling mode when this 2-year old post was brought back to the top. I will try to catch up over the next week. Parts are currently in storage.

[my62toy]

I have my dash bezel so no need to look for anything for me. Thanks.

[unclescratch]

Can you give me a better I.D. of that camshaft? Letters/numbers stamped on the end. Were the lifters organized when removed to sit back onto the same lobes? Has it rusted in storage? Thanks. [email protected]