 |
|
| SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
|
Thread Tools | Display Modes |
|
#1
11-04-2009, 10:27 PM
|
|||
|
|||
Ported 6x-4 heads
I have a set of 6x-4 heads with a mid port job for sale. Heads are currently set up for a solid mechanical camshaft. I was hoping to run these on my 455 stock motor but I am going to build up my 69 WT 400 instead. Bought these 4-5 years ago and they have been kept on a shelf in a dry shop since then.
SI valves 2.11 and 1.77. Installed height of 1.6 inches. They flow 255@ .550 lift and 215 on exhaust. I was told that the low lift flow was really good as well. I am the second owner of these heads and I have not used them since I bought them over 5 or so years. No flow sheet, purchased from a board member, but heads were done by Mr. P-Body. The cam he ran was a Ultradyne solid lifter. 243/251 duration @ .050. The lift was 518/530. $600 or best offer. |
|
#3
11-05-2009, 05:14 PM
|
|||
|
|||
|
Replied.
|
|
#4
11-11-2009, 12:00 PM
|
|||
|
|||
|
Bump
|
|
#5
12-23-2009, 05:47 PM
|
|||
|
|||
|
more pics
These came off a 12.7 second 461 stroker motor. Untouched since taken off. It looks like the intake runner is wet and oily - that is from the cleaning spray from the adjacent intake when I was cleaning it out. They are not oily or wet - just a little black carbon.
THanks |
|
#6
01-28-2013, 01:15 AM
|
|||
|
|||
|
Heads are sold. Thanks PY.
|
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
