Reply
 
Thread Tools Display Modes
  #1  
Old 10-09-2010, 01:27 AM
TriMy400 TriMy400 is offline
Junior Member
 
Join Date: Oct 2010
Posts: 1
Default Tripower Gremlins

I recently finished a full restoration on my Goat and was finally able to drive it again after 4 years.

The car was running very rich (so bad it would burn your eyes at idle) and had issues with flooding and stalling. I tried all of the typical adjustments, but wasn't able to resolve the issues. It was quite frustrating since I paid a local professional to rebuild and restore the set up in the first place.

Eventually, I found a DVD called "Tripower Basics, Mods, & Troubleshooting" at www.pontiactripower.com and thought I would give it a try. I assumed there was a decent chance it would just be someone demonstrating items from the Pontiac manuals, but was pleasantly surprised. The DVD actually contains a collection of tips and information that I haven't found from any other sources and Mike (the one that made the video) was very responsive to questions via email as well.

I thought I was fairly knowledgable about tripowers and carbs in general, but didn't realize there were so many specific pieces of information required to get these setups to perform properly.

I just thought I would share my experience in case others are having issues with their tripowers or would just like to know more about how these setups (should) work.

  #2  
Old 10-09-2010, 11:09 AM
geeteeohguy's Avatar
geeteeohguy geeteeohguy is offline
Ultimate Warrior
 
Join Date: Dec 2009
Location: Fresno, California
Posts: 5,399
Default

Thanks for posting. I think that after several decades and many swap meets and parts exchange, a lot of strange stuff can happen to these units. Good to know there is help! Guess I've been lucky.....the two I own have been trouble free for as long as I've owned them...31 years and 29 years. Probably because they haven't been "modified". Thanks again.

  #3  
Old 10-11-2010, 12:02 AM
Blue1967GTO Blue1967GTO is offline
Senior Chief
 
Join Date: May 2006
Location: SE WI
Posts: 390
Default

Mike W. at pontiactripower.com is a great guy. I've barely ever even touched a carburetor and with his advice and parts I managed to rebuild, restore, refinish, modify, and adjust my tripower setup to work with my monster engine build. Very satisfying.

__________________
Check out my cruise night! www.brewcitycruisenight.com
  #4  
Old 10-11-2010, 07:18 AM
coyzstze's Avatar
coyzstze coyzstze is offline
Member
 
Join Date: Feb 2010
Location: Michigan
Posts: 45
Default

I bought a 65 tripower unit from Mike earlier this year. He's a great guy and a true professional.

  #5  
Old 10-11-2010, 04:36 PM
66GTO Jim's Avatar
66GTO Jim 66GTO Jim is offline
Chief Ponti-yacker
 
Join Date: Oct 2004
Location: Georgia
Posts: 857
Default

Quote:
Originally Posted by coyzstze View Post
I bought a 65 tripower unit from Mike earlier this year. He's a great guy and a true professional.
X2 and his DVD is worth more than he charges!!! Jim

__________________
"Never try to teach a pig to sing. It's a waste of time and it annoys the pig"
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:19 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017