| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
Hey guys, I've got a question, i replaced the suspension on my TA with Hotchis springs, but my car still doesn't sit level when looking at it from the rear. I thought the springs were just old, that's why I replaced them, but it's still sits lower on the driver's side. Any suggestions?
__________________
1979 Trans Am SE Black & Gold, T-tops, 400/4spd!!! I don't know whether I need a frontal lobotomy or a bottle in front of me?! ![]() "A Camaro looks like it could kick your ass. A Trans Am looks like it's coming over to do it!" Last edited by muzzfactor; 02-27-2011 at 01:21 PM. Reason: spell check |
|
#2
|
||||
|
||||
|
Can you make a picture of it?
|
|
#3
|
|||
|
|||
|
I have it up on jack stands right now working on the brakes or i would gladly snap a pic.
__________________
1979 Trans Am SE Black & Gold, T-tops, 400/4spd!!! I don't know whether I need a frontal lobotomy or a bottle in front of me?! ![]() "A Camaro looks like it could kick your ass. A Trans Am looks like it's coming over to do it!" |
|
#4
|
|||
|
|||
|
I had the very same issue. I mistakenly assumed that something was twisted so I took it to a chassis shop. They did find some minor twist which was corrected. Despite this the car still sat higher on one side then the other, by about 1/4 inch.
Luckily the issue had a simple solution. One of the leaf springs was not sitting square inside the rear axle pad. It was barely noticeable. Check that. I loosened the leaf springs at the axle and adjusted them to fit right and car sits flat now. |
| Reply |
|
|