| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
||||
|
||||
|
Here is a 70 Lemans shell I just picked up. Prior owner was using it as a parts car for his pro touring 70 LeMans project. Originally purchased both cars in Arkansas and brought both up to Minnesota when he moved here a few years ago. Frame is drum brake, power steering, open rear. Rolls and steers. Nice frame with crossmember no rust on the frame. Newer rear shocks.
Body has nice floors except where prior owner cut out floor brace on passenger side. Couple pinholes in passenger rear floor. Front and rear window channels are nice. Lower rear window corners have some small rust areas not bad at all. Package tray, rear seat divider are nice. Rear seat mount clips are missing. Needs quarter skins due to rust. Outer wheelhousings might be ok, inners are good. Trunk floor needs replacement due to cutout sections. Was hit in back at one time so tailpanel tweeked a bit. Roof and sail panels good, catwalk good both top and bottom. Decklid torsion rods intact. Firewall and dash top are nice. no tags (prior owner removed) Rust free decklid is super nice. Doors both have super nice clean seams, one ding in the back edge of one door, some rust bubbling on one door. Fenders are shot but inners and hood hinges are good. Good builder or part out for frame, decklid and doors. $1200 for everything or $500 for rolling frame and bare shell. I will sell decklid, doors, and inner fenders seperate but only after the shell is sold. Thanks John ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
|
#2
|
||||
|
||||
|
How much for just the bare shell, no frame? Looking to start a race car project.
Thanks, Nate
__________________
1970 "Real" Judge RAIII 4-speed, Atoll Blue w/painted white top. Mild RAIV headed 400 motor in now. |
|
#3
|
||||
|
||||
|
Nate,
Do you need the doors and decklid? I also have a 69 shell available for a race car project. In addition, I have a fiberglass 69 GTO front clip, hood, decklid, and rear bumper. Thanks John |
|
#4
|
||||
|
||||
|
Sale pending on shell to Nate.
|
|
#5
|
||||
|
||||
|
Might be interested in deck lid. Let me know if available.
__________________
http://www.youtube.com/watch?v=t9eWgLd0q-U |
|
#6
|
||||
|
||||
|
Once the car is gone I will offer the decklid and doors. 1050goat will get dibs on the lid.
|
|
#7
|
||||
|
||||
|
Rolling frame and body shell are SOLD. Thanks Nate, Good luck with the project!
|
|
#8
|
||||
|
||||
|
It looks like this car had body side mouldings. Do you still happen to have those?
|
|
#9
|
|||
|
|||
|
John are you still holding on to that deck lid
|
|
#10
|
||||
|
||||
|
No side mouldings, (never came with the car)
I picked up a 71 GTO back in April so I am keeping the decklid for that car. All other parts are sold. |
| Reply |
|
|