[Pepi]

Hi all, looking for a correct master cylinder for my 73 formula, with correct bleeders and cap. I would like to find one that would fit the build date of my car.

Any pictures of the correct cap would be appreciated. The original master cylinder was replaced in the late 80's early 90's, I don't remember if the rebuilt one came with a cap and was used or if original cap was reinstalled. So I might be good with the cap.

Thanks.

[Pepi]

So it appears after some good info from guys on this site, I am looking for a master cylinder with CS3075ish through CS3094ish stamped by the forward brake line below the bleeder screw.

If anyone has anything close please let me know.

Thanks,
Pepi

[Pepi]

No one with any stashed away? Anything close to those numbers would be considered.

Thanks

[Pepi]

bump

[Pepi]

Still looking for one.

[Pepi]

bump

[Pepi]

Still looking for a CS3XXX master cylinder with bleeder screws if anyone has one.

Thanks

[Pepi]

Bump

[Pepi]

Thanks to some new information from SD73, I could even go earlier to about 48 for the Julian date. So now I am looking for something close to CS3048 and on up.

[sinister76ta]

A power disc or manual set up? My 73 don't have a booster, thats why I ask.

[Pepi]

I have power brakes.

[Pepi]

Still looking for a master cylinder for 73 with power brakes, somewhere between CS3048 through CS3094 for a date code.

[Pepi]

Reviving a very old want ad. Still looking for a 73 master cylinder for power brakes.

[Formulabruce]

Originally Posted by Pepi

Reviving a very old want ad. Still looking for a 73 master cylinder for power brakes.

I have one. I think it has the bleeder "pads" but not any bleeders as stock. I will check it , still on the booster with all the stuff.

[Pepi]

Originally Posted by Formulabruce

I have one. I think it has the bleeder "pads" but not any bleeders as stock. I will check it , still on the booster with all the stuff.

Cool, just let me know. Thanks Bruce!