[screamingchief]

Some parts I was collecting for a pontiac 350/383 project.

1 (set of 8) NIB PPR/Probe SRS forged pistons (just pistons/NO pins),2618 material,3.905" bore (.030" 350) for use in any pontiac 350 block w/a 3" main ~ 4" stroker crank using 6.800" long rods w/.990" pins,super light @ 409g. uses the 1/16" 1/16" 3/16" ring package and valve relief's are 5.5 cc. (pin[s] #14808 available from Probe.)

Asking $250.00 (+ shipping) & I'll throw in 1x of these vvvv headgasket sets if both are'nt sold by time of sale.

Innovative Seal (ROL) 350 Headgasket sets #71884-1CS (have 2) $35.00 ea (+ shipping).

Torker II Intake:
Nice clean intake,port matched to stock port size,all threads clean,no issues @ all asking $125.00 (+ shipping).
(includes Mr Gasket #5848 ultra seal intake gasket set and a MOROSO 1" open phenolic spacer w/gaskets)

PPR/Isky Tomahawk solid flat tappet camshaft: asking $125.00 (+ shipping)
specs:
272°/278° adv.
238°/244° @ .050"
.480"/.480" w/1.5
112° LSA
51° Total OL

Crower pontiac solid lifters NIB (the good ones),asking $100.00 (+ shipping).

Ultradyne solid lifters NOS/never used (the ones w/a lower PR seat),asking $75.00 (+shipping).

1 (set of 16) new in pkg. PPR/PRW pushrods .080" wall hadrened cro-mo 9.200" long,asking $50.00 obo (+ shipping).

1 (set of 16) used Comp Cams "magnum" pushrods .080" wall hardened cro-mo 9.130" long,asking $30.00 (+ shipping)
(kept these mostly for "spares" as a couple may be iffy/bent)

Comp Cams Rocker Stud Girdle for iron heads,asking $125.00 (+ shipping).

Pr. DCI tall cast aluminum valve covers,plain no logo,asking $200.00 (+ shipping).

Pr. MOROSO tall chrome valve covers,asking $40.00 (+ shipping).

Pr. Aluminum 3/4" tall valve cover spacers,asking $50.00 (+ shipping).

Precision Oil Pumps HD billet/hardened oil pump shaft asking $10.00 (+ shipping).

Fittings for plumbing rear of heads,2 sets 1/2" NPT,3 sets 3/8" NPT,asking $25.00 ea (+ shipping).

Feel free to make offers on any of these items just remember that said offers may -or- may not include the "extras" when/if available.

Can get pics too if wanted (too busy right now to post 'em),PM me if interested.

Thanks for looking.

Bret

[Blowd]

PM sent on spacers..

[Firebob]

Is the cam new as well?

[screamingchief]

Originally Posted by Firebob

Is the cam new as well?

Yes,it is.

To all:
Best to PM me with questions and such,so as not to unfairly occupy the top here.

PPR solid cam/TII intake/DCI valve covers may be spoken for @ the moment,but dont be affraid to contact me for a spot in line just in case,as they may end up being available if that deal falls thru (CL flakes,,,you know...),things are kinda up in the air @ the moment,sorry for any confusion.

Also have my '70 LeMans/GTO race car & these parts listed for sale locally,just have'nt got the ad for the racecar posted here yet,just been too busy.

Thanks for understanding.

Bret P.

[duke455]

got any pics of the oil pump shaft? interested

[duke455]

Pm replied. Thanks

[screamingchief]

Sold/NLA:
Valve cover spacers.
TII Intake.

PPR solid cam & DCI Valve covers are fair game again.

ADDING:
New/never used Edelbrock Super Victor 4500 EFI Intake for Pontiac V-8 ($450.00 retail),intake is currently painted VHT Pontiac metallic blue,comes w/NIB EFI rails ($100.00 retail),EFI boss block offs ($50.00 retail) so this can be run with carbs too,and a 4500 to 4150 2" Edelbrock adapter (also $50.00 retail).
Asking $300.00 (firm) +shipping for all of it.

Almost new (used once) set of 4 Mac's car tie down straps,these are the good ones,come in nice bag with a full set of 4 axle/frame loops.
Asking $150.00 obo. +shipping (FYI: these are kinda heavy).

Thanks for looking,Bret.

[Scott65]

PM sent on Super Victor/accessories.

[screamingchief]

Super Victor EFI intake is sold,thanks PY/Scott65.

Still have PPR/Isky solid cam and Crower solid lifters.

Still have the DCI plain/tall cast aluminum valve covers.

Still have POP billet oil pump shaft.

Macs straps are gone (went w/racecar).

Moroso chrome valve covers are no longer available as well (went w/racecar too).

Feel free to make offers,this stuff needs to go ASAP.

Thanks for looking.

Bret P.

[Jim Robertson]

Bret, is your Comp stud girdle part #4051? Does your girdle come with the matching Comp adjusting nuts? Thanks

[screamingchief]

New Lowered Prices !!!

1 (set of 8) NIB PPR/Probe SRS forged pistons (just pistons/NO pins),2618 material,3.905" bore (.030" 350) for use in any pontiac 350 block w/a 3" main ~ 4" stroker crank using 6.800" long rods w/.990" pins,super light @ 409g. uses the 1/16" 1/16" 3/16" ring package and valve relief's are 5.5 cc. Just add a set of pins for $100.00 from Probe and you'll have a set of $500.00+ custom pistons,this ^^^^ is a SUPER deal folks.

(pin[s] #14808 still available from Probe.)

Asking $225.00 shipped & I'll throw in 1x of these vvvv headgasket sets if both are'nt sold by time of sale.

Innovative Seal (ROL) 350 Headgasket sets #71884-1CS (have 2) $30.00 ea shipped.

PPR/Isky Tomahawk solid flat tappet camshaft: asking $100.00 shipped.
specs:
272°/278° adv.
238°/244° @ .050"
.480"/.480" w/1.5
112° LSA
51° Total OL

Crower pontiac solid lifters NIB (the good ones),asking $90.00 shipped.

Will do the PPR/Tomahawk SFT cam & Crower lifters for $175.00 shipped,another SUPER deal here.

Ultradyne solid lifters NOS/never used (the ones w/a lower PR seat),asking $65.00 shipped.

1 (set of 16) new in pkg. PPR/PRW pushrods .080" wall hadrened cro-mo 9.200" long,asking $45.00 shipped.

Pr. DCI tall cast aluminum valve covers,plain no logo,asking $195.00 shipped.

Fittings for plumbing coolant to rear of heads,have 2 sets of 1/2" NPT,and 3 sets of 3/8" NPT,asking $20.00 ea. shipped.

Need this stuff gone ASAP,,,getting tired of looking @ it lately...

Thanks for looking.

Bret

[marks73ta]

Brett, you have a PM. Thanks.

Mark

[screamingchief]

Tenatively sold pending receipt of payment:
PPR/Probe Pistons.
PPR/Tomahawk cam & Crower solid lifters.
PRW Pushrods.

??? Comp Stud Girdle ???

That mostly leaves the DCI cast "No Logo" valve covers.

Pic of those vvvvv.



Also just one 350 headgasket set left now (vc gaskets missing) lowering price to $20.00 shipped to account for that.
The NOS UD solid lifters (bonus = come in a nice Powerhouse plastic lifter storage case)
And those sets of head fittings for plumbing coolant to the front water crossover.

That's the last of it,come & get it folks?

Thanks Bret P.

[screamingchief]

DCI valve covers $190.00 shipped.

Comp Stud girdle $120.00 shipped.

UD solid lifters (in nice Powerhouse plastic organizer) $60.00 shipped.

Coolant fittings $15.00 pr. shipped.

Innovative Seal (ROL) 350 Headgasket set #71884-1CS $20.00 shipped.
(opened ~ missing valve cover gaskets)

Feel free to make offers too.

Bret P.

[screamingchief]

These gotta go folks,shoot me a PM if you are interested in any of it.

Have a few other odds & ends I'll post in another thread in the next day or two.

Thanks !

Bret P.