[67ramair4]

Switching to front discs (67 GTO), have mostly everything needed except new brake lines. I'm using the the 71 and up proportioning/combo valve, so using the old plumbing is out of the question. Too difficult to bend tubing without some sort of schematic, as to bends etc!!

Would lines from a 71 GTO (non-power) be the correct tubing kit to order? Surely someone has done this before and can be helpful in what direction to take??

[JSPONT]

Contact Scarebird on this site, he will help you with what you need.

[Scarebird]

That is an Inline Tube or Right Stuff thing...

[67ramair4]

Originally Posted by 67ramair4

Switching to front discs (67 GTO), have mostly everything needed except new brake lines. I'm using the the 71 and up proportioning/combo valve, so using the old plumbing is out of the question. Too difficult to bend tubing without some sort of schematic, as to bends etc!!

Would lines from a 71 GTO (non-power) be the correct tubing kit to order? Surely someone has done this before and can be helpful in what direction to take??

Well it appears Pirate Jack has what is required, and understood what was needed!!

[NeighborsComplaint]

I bought my rear disc conversion kit and master cylinder/proportioning valve from Pirate Jack's. They know their stuff.

[Scarebird]

Pirate Jack is MBM's retail outlet.