FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
wtb comp 300b-6 cam
Looking for a comp 300b-6 cam.
|
#2
|
||||
|
||||
I have a new 290-b6 but I also have this custom Isky Cam Ace from PPR had ground for me which is very similar to the 300-b6. These lift ratios are for 1.5 so it can be quite a bit bigger. If I wasn't going roller, this would be the cam I was going to use for the new in progress motor.
__________________
Johnny US Army Retired 1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
#3
|
|||
|
|||
cams
pm sent
|
The Following User Says Thank You to 68hotbird For This Useful Post: | ||
#4
|
||||
|
||||
Quote:
Sent from my Pixel 3 XL using Tapatalk |
#5
|
|||
|
|||
cam
That is a hydraulic roller and I have 2 of those I use in customers builds as they come along. I'm not a big fan of hydraulic rollers in a Pontiac but I can give them what the want.
|
#6
|
||||
|
||||
The specs on that Isky are on a custom Solid Flat Tappet, not a Hyd Roller
__________________
Johnny US Army Retired 1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
#7
|
|||
|
|||
cam
Johnny406 I thought he was referring to a roller cam I bought off of another site a couple days ago. I knew the isky is a solid flat tappet.
|
The Following User Says Thank You to 68hotbird For This Useful Post: | ||
#8
|
||||
|
||||
Custom Isky SFT cam
Is this cam available? If so, $?
Thanks! |
Reply |
|
|