FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Miller Tailshaft Bushing Removal Tool for 32 Spline Muncies
Anybody know the Miller tool number for the 32 spline Muncies? I have Miller #6957 for 27 spline Muncies but would like to get one for the 32 spline Muncie in my 72 Cutlass Supreme. Picture attached of the 6957.
If you are unfamiliar with this, it is a slick tool I came across when I had my driveshaft balanced and needed a new yoke and tailshaft bushing. With this tool you can pull the bushing without removing the trans from the car (or removing the tailshaft housing from the trans). I believe Miller has been out of business for some time and it is difficult to track down info online. |
#2
|
|||
|
|||
Snap-On makes that tool also. I don't know the part #, but it may be easier to track down than the Miller tool. A quick Google search should get you the correct #.
|
#3
|
|||
|
|||
Just did a search. Try Snap-On S8687A. That should be the tool you need.
|
#4
|
||||
|
||||
Thanks! I'll check it out!
|
#5
|
||||
|
||||
Anyone know if there is one for a 2000 Trans AM 6speed (don't know the actual trans) ?
George
__________________
"...out to my ol'55, I pulled away slowly, feeling so holy, god knows i was feeling alive"....written by Tom Wait from the Eagles' Live From The Forum |
Reply |
|
|