[bluejudge]

Hi, my hood tach started to seperate on my 70 Judge. I took it off and I am missing one of the screws which is in the top right of the hood tach. I attached a picture. So I need a screw, does anyone know what size these are, and where I can get one? Also I could not get any of my sockets in there without making the path to the screw bigger. Does anyone have any tricks to get to these. Thanks, Marc.

[north]

40 years ago, I wanted to open the hood tach on a GTO I had just bought, I took an old socket and ground down the exterior diameter till it could fit into there. Still have it in my toolbox.

[bluejudge]

Originally Posted by north

40 years ago, I wanted to open the hood tach on a GTO I had just bought, I took an old socket and ground down the exterior diameter till it could fit into there. Still have it in my toolbox.

Thanks North for the response. I didn’t see this until today. Yesterday I texted Randy Watson www.rctach.com and he was helpful texting me back with the correct size for socket which is 3/16 and yes it has to be ground down as North said.