[HWYSTR455]

Originally Posted by "QUICK-SILVER"

The wide little end bumping the counter weight coming down on BDC. May not touch enough while building to notice. But once things get settled in....

Just got me wondering. Especially since the knock hasn't changed after this much run time.

Clay

It really doesn't have that much run time, maybe a total of 2-3 hours max. I commented the same on the phone with Paul, but if it is a rod just barely touching the tray, the tray can flex just enough to get pushed out of the way.

My thoughts were if it were a tray contact thing, usually it just grabs it and twists it up, or punches a hole in it, and the engine doesn't run long, or looses oil psi.

.