These calipers are probably 8 or so years old. The OD on the pistons are 1.983, so I assume it's the 2" version.
Not sure how long this has been an issue - I assume since the get go. I had everything apart when I rebuilt the suspension last year, but didn't change or replace any of the parts. I didn't notice the problem then, but I wasn't looking too close. The backing plates and caliper brackets are stock reproductions the spindle is factory. I'll check to see if there's any slop in the caliper brackets.
I'll get a diameter on the rotor. I sent them off with my son to have them turned at his school auto shop today.
__________________
Ken
'68 GTO - Ram Air II 464 - 236/242 roller - 9.5” TSP converter - Moser 3.55 Truetrac ( build thread | walk around)
'95 Comp T/A #6 M6 - bone stock ( pics)
Last edited by Verdoro 68; 03-06-2024 at 02:31 PM.
|