Quote:
Originally Posted by wbnapier
HWYSTR455,
I ordered what you suggested from Waytek, except the high-heat butt connectors and heat shrink tubing. I need to roll to work and didn't have time to shop. Can you post a link of a Waytek kit for those and I'll order at the office? What Klein crimper do you like? Can you post a link? I may already have it.
Understood on the plug wires, cap, and rotor. Do you have a recommendation for those? I have MSD Dizzy #8563.
Off to work.
|
The Klein crimper is #1006, and is available on Amazon:
https://www.amazon.com/Non-Insulated...a-382712975494
Here's the nickel plated high heat butt connectors, 2 gauge ranges:
https://www.waytekwire.com/item/3246...tor-12-10-AWG/
https://www.waytekwire.com/item/3146...tor-16-14-AWG/
Another comment, ONLY use GXL or TXL wire on a car, no parts store 'primary wire'. It can't stand the heat and has higher resistance. I like using WireBarn.com, they are very good prices, quality items, and fast shipping.
https://www.wirebarn.com/GXL-TXL-Wire-_c_530.html
GXL is fine, maybe look at the 'assortment' kits. 12 gauge for high loads, 14 or 16 for everything else.
WireBarn has heat shrink too, most common sizes are 5/16, 3/8, and 1/2 inch:
https://www.wirebarn.com/Heat-Shrink-Tubing_c_11.html
The MSD replacement parts specified for that MSD distributor is the way to go. They make both red and black colors, either is fine.
This is the black cap & rotor kit at Summit:
https://www.summitracing.com/parts/msd-84317
Red kit:
https://www.summitracing.com/parts/MSD-84335/
.
__________________
.
1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song:
http://www.youtube.com/watch?v=7zKAS...ature=youtu.be