View Single Post
  #5  
Old 12-27-2019, 11:55 PM
Verdoro 68's Avatar
Verdoro 68 Verdoro 68 is offline
Ultimate Warrior
 
Join Date: Jun 2003
Location: Clayton, CA
Posts: 2,824
Default

Took a look up under the dash and I didn't see anything missing or out of place. I did confirm only 1/2 of the lights in the pod seem to be working for whatever reason. The ones on the speedo side aren't lighting up.

I unplugged the main harness and reseated it, but it didn't fix anything. The only thing I can think of is there's a good layer of paint between the ground straps and where they attach to the metal dash. I was like that with the old setup and it worked fine, but when I get a minute I'll try to clean those tabs off so it's a metal to metal contact see if that helps anything. Hoping I didn't ruin the gas gauge by bottoming it out. I need to pick up a new multimeter to get rid of some of the guess work.

__________________
Ken
'68 GTO - Ram Air II 464 - 236/242 roller - 9.5” TSP converter - 3.55 posi (build thread | walk around)
'95 Comp T/A #6 M6 - bone stock (pics)

Last edited by Verdoro 68; 12-28-2019 at 12:07 AM.