[HWYSTR455]

Figured I'd start a build thread for a revival build that's been on the back burner for a while, had changed directions a couple times over the years, as I was distracted with other builds and lack of funds/time to continue.

A little history, bought the car in spring of 1981, I am the 3rd owner, second owner butchered it somewhat, and after totaling my bought-new 1979 Formula WS6 (403 car), was on a firebird kick, and found this car.

Car was an original '71 formula 400 4-speed 10-bolt, Tropical Lime, not sure what the original color interior was, would have to look it up. But 2nd owner changed it to a black interior, cut the original hood for a shaker (yuck), and painted it gold which looked like he did it in his back yard.

Original 400 was gone, 2nd owner put a junkyard 350 2bbl in it to be able to drive it, and not sure of what his long term plans were, but I'm sure it would have not been acceptable even in the days where I was still getting my car-chi going.

I went into the Navy in @Oct 80, sent just about all my money home, while I was in boot camp, I had searched for the car, finished boot camp, got stationed to my training command, went home one weekend and purchased the car, and my dad took the car to local shops to have work done to it by my direction, went home on weekends, and was able to get the car in running condition as-is, but it was rough.

I was able to get the engine somewhat running reliably, and drove it back & forth to training in Millington, TN (from VA, 16-18 hours each way) during the summer of '81. Worked on it at the base 'garage' tuning, fixing items, etc while I was there. I beat that car, off road, field parties, down by the river camping, through major flooded roads during spring rains, you can only imagine...

Decided I was going to go through it before I was deployed (med cruise, Libya, Israel, Egypt, etc, USS Nimitz, fall of '81), pulled it into my parent's garage, and proceeded to gut it. I came back on weekends until I actually deployed.

Here's a pic of once I had got it going, one coat of crappy paint, and some mechanical work done, and how I drove it back & forth to training in TN. This was after training, was stationed in Oceana, VA, and had brought shipmates back with me and we did some DC sight seeing and bar hopping. This was along the river by the national mall, with the 14th street bridge in the background. (I changed the hood to a flat hood, and the body shop without my permission molded a hood 'bubble' on it)

.

[HWYSTR455]

Did my 1st cruise, still shipping as much money as I could spare back home, ordering parts, and had it piling up while I was away.

Here's a couple Navy pics as I was deployed. During my 1st deployment, during the 'Bay of Blood', and the 'Line of Death', we shot down 2 Libyan fighters, and were the 1st to provide close air support to the marines in Beirut. (Marine barracks bombing). Earned 2 battle 'E' ribbons on that cruise.

.

[HWYSTR455]

Here's a good pic, one you won't see on the front of the Washington Post, a pick of a stop we did during work-ups, prior to crossing the sea to the Med, we stopped at Ft. Lauderdale. This was back in the day which Lauderdale was known for 'recruiting' for adult films, at a bar with a pool, during a bikini contest, prior to the jello wrestling event. You can see the USS Nimitz in the background....


.

[HWYSTR455]

After that cruise, again, stationed at Oceana, drove home on weekends, and gutted the car, cutting the quarters off, wire-wheeling everything, and using POR-15 on every exposed surface. (OE quarters)

.

[HWYSTR455]

Machine work getting done, I focused on the engine compartment, POR-15 again, and shooting it with engine paint....


.

[HWYSTR455]

Rebuilt the short block, suspension using Rancho III parts, H-O sway bar, poly bushings, sleaned, POR-15, and painted everything, new OE core support, etc...

EDIT: And me back in the day dropping the pushrods in...


.

[3fastgtos]

Cool car, good luck with it.

[HWYSTR455]

Originally Posted by 3fastgtos

Cool car, good luck with it.

Thanks! I'm just going over the history now, I haven't gotten to the current build! Have to remember, this all is in the early 80s, and has gone through several versions since then.

EDIT: This is kind of the 1st time I've had a chance to do a time line on it, to give an idea, the engine about to go into it is number 13!


.

[HWYSTR455]

So originally, I did a top of the line Alpine stereo in it, and Recaro seats, with a Hooker Show Chrome 4 point roll bar. I've had a number of people offer big money for the roll bar, they were only made for a few years. Also had the rear seats recovered, and did new door and rear quarter interior panels, as well as a '79 T/A dash. Also did a modified '79 headliner, filling in the areas for the retractable shoulder belts (the 73 one piece headliners were not available at the time)

Doors have the early braces for the side impact laws...

.

[HWYSTR455]

In the late 80s, a lady pulled out in front of me, and I T-boned her at like 30mph. Wrinkled the fenders, hood, nose, and core. Insurance co totaled it, because replacement parts were unavailable, they paid me out 13k, and bought it back for $500. That allowed me to fix it, and used OE fenders, core, hood, valance, and I found a usable endura.

Oh, forgot to mention, when I did panels before and had it painted lacquer, I had bought OE T/A fenders and hood, got rid of the 'bubble' hood.

Here's a could pics...1st one is the lacquer job.

.

[HWYSTR455]

The original 9" I put in the car was boogered up in the accident, I replaced it with a rebuilt 10 bolt, grenaded it, put another in, grenaded that one, then a 3rd, went to a 12 bolt, then another, and then when money became available, did another new 9".

Once that 9" went in, I was on like my 8th 400 (late 80s/early 90s), and decided to do a 455. An aircraft mech buddy of mine said he would build one for me and ended up doing a solid roller, 70 4 bolt block, SD 421 rods, and he ported a set of '70 64 heads. He also port matched a Offy 2x4 intake, and built a pair of AFBs for it.

.

[napster]

This is one heck of a build. Can't wait to follow this thread.

[SD455DJ]

Great history and transformations you done to it over almost 40 years...very cool! Following along too!

Dennis

[Gator67]

Looking forward to this one!

[HWYSTR455]

Originally Posted by Gator67

Looking forward to this one!

Thanks, me too! Last time I drove it was '99 East Coast Power Tour, I will post pics! So I'm anxious, miss this car, it was my original hot rod...

As a spoiler, the current build is a 535 IA2, Northwind, Round E-heads, Sniper XFlow, HyperSpark ignition, APT Extreme TKO-600, fresh 9" with Tru-track, full Global West CAT 5 suspension, Baer 14/13" brakes. I was close on the Procharger build, I will post pics and explain...


.

[HWYSTR455]

So mid-90s, lots of stuff happened, but highlights, got the car painted again, this time a color change, and went with a '98 Dodge Durango color, Chili Pepper Red Pearl. I was pushing to get ready for the upcoming, first ever Power Tour, which was the '99 East Coast Power Tour.

Went to 17" wheels, freshened the suspension, and put another 455 in it. On top of this version of my 455s, decided to do port injections, and a popular offering was the Accel DFI gen 6, had an intake converted with bungs and rails, and a Accel throttle body. I thrashed and got the car done in 9 mo, working long hours to get it done for the tour, which was from north of Boston to Panama City Beach Florida.

Barely made it, caught up with the tour in western VA as it was passing by, stopping once at an Accel 'EMIC' for some refinement of the tune on the new ECU, a place west of Richmond.

Here's a few shots of this version...

.

[HWYSTR455]

Some Power Tour shots...

One's on the highway in southwestern VA/Carolinas, some on the beach in Daytona, and then the final stop, Panama City Beach, which is the pic I used pretty often. May have seen these over the years...


.

[HWYSTR455]

Came back from the power tour and basically tore into it again, and wanted to do a blow-thru engine. Was at a point I needed an engine for my daily driver, so swapped the 455 over from the T/A, and started machine work on a new engine for boost.

Long story short, went through like 4 engines that I originally was building for the T/A by putting them into the LeMans. One was a crank that broke, one was a rod issue, and the rest were high mileage. I would have to go through my receipts, but fairly certain this is #8 in the LeMans/tribute build.

I would actually have to go back through docs in order to get accurate failure and total counts. I know I have to clean up the docs for the LeMans project, so that will be a good start. I literally have boxes and 3 ring binders full of stuff, it's going to be an effort.

.

[Hammertime Mike]

Subscribed, looking forward to watching your next project !

[keith k]

Great history you have with the car. The number of engines had my head spinning!
Subscribed.