FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
![]()
I think I know the answer to this but figured I’d check with the experts. I had to remove the alternator from my ‘70 today (to access fuel line) and during reassembly I pinched the wire loom between the alternator bracket and intake. When I went to put the negative battery cable back on, there were sparks everywhere and smile started drifting up along the loom down to the starter. Ugh. My question is:
Can I repair the engine harness by simply cutting off the part that got pinched or do I need to replace the entire harness? Not sure if it shows up very clear in the photo but there is copper showing in the red wire. ![]() Sent from my iPhone using Tapatalk
__________________
Three times the sound peaks, falls back, peaks again. A throttling back to cruising speed, a dwindling grumble of thunder and...gone. The frogs take up where they left off. |
Thread Tools | |
Display Modes | |
|
|