69 GTO Ram Air 3 Air Cleaner Setup
I have a 69 Ram Air 3 Air Cleaner and I want to make sure I hook up the vacuum side of the system correctly. I believe the way to hook it up is run a line from a vacuum port on the intake manifold to one of the two ports on the thermal sensor located in the air cleaner base and then hook up a line from the other port on the sensor and run it to the two autotherm heat diaphragms located inside the ram air hood plate. And when you first start the car do the heat diaphragms initially close and once the intake air temperature is warm they will open?
Thank You
Carousel72TRed
|