FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
American made u joint u bolts
does any one know where I can get some American made u bolts for 65 tempest?
I am talking about for the u joint. Thanks greg |
#2
|
|||
|
|||
I bought some from Dennys Driveshaft several years ago. I don’t know where they are made though.
|
#3
|
||||
|
||||
|
#4
|
||||
|
||||
AMK has the US made fasteners, most are NOS. Scroll down to the bottom of the 12th page. Only issue is they require a $30 minimum order but only place to get the correct grade nut, bolts, etc.
https://www.amkproducts.com/wp-conte...BULK_25-38.pdf
__________________
Norm J |
The Following User Says Thank You to tripower For This Useful Post: | ||
#5
|
||||
|
||||
AMK is the only one that I can think of that makes them in the US. DANA Spicer is what the OEs used to use, at the time they were made in the US, are now a mix of US/China, but the China stuff will be moving back.
If you are just trying to support US-made stuff, it's a tough call, because even if they are made in the US, the steel can still come from China. (I am not sure where AMK's steel comes from). I'd like to think now that Pittsburg steel plants are roaring that it would be where AMK gets their steel, and it is fairly close by, with direct rail and air access. The AMK facility is in Winchester, VA, and employs (mostly) local people, and are advocates for the local community. They are patriots at heart. Aside from all that, if your concern is quality, the u-bolts are under very little load, and the DANA Spicer ones work fine. I may be mistaken, but think the nuts are specific, they are flat all the way across the faces, to bite more of the lock washers. My understanding is they are not grade 8. Make sure your yoke is good. I've seen many damaged from years or incorrect u-joint installation where the locating 'nubs' for the caps are worn badly. No way you can properly center the joint in that case. .
__________________
. 1970 GTO Judge Tribute Pro-Tour Project 535 IA2 http://forums.maxperformanceinc.com/...d.php?t=760624 1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car https://forums.maxperformanceinc.com...ght=procharger Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be |
The Following User Says Thank You to HWYSTR455 For This Useful Post: | ||
#6
|
||||
|
||||
AMK has LOTS of good bolts and stuff!
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune 13.43@103.4 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs |
#7
|
||||
|
||||
Strange sells them, got some this year but didn't look like anything special
__________________
Chris D 69 GTO Liberty Blue/dark blue 467, 850 Holley, T2, Edelbrock Dport 310cfm w Ram Air manifolds, HFT 245/251D .561/.594L, T400, 9" w 3.50s 3905lbs 11.59@ 114, 1.57/ 60' |
#8
|
||||
|
||||
__________________
Triple Black 1971 GTO |
Reply |
|
|