FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Torque converters
I am running a T400with a 10"converter (2800 rpm stall) behind a mildy modified 455 in a '67 GTO. This is a street car with ac and will not be raced. What are you guys running for a trans cooler? I would like to install a frame mount like this; https://www.summitracing.com/parts/prm-6321?rrec=true
or something like this; [https://www.jegs.com/i/JEGS/555/6036...555%20Products |
#2
|
||||
|
||||
If it is run in series with the stock radiator possibly. I prefer the stacked trans cooler for all my cars with higher stalls in them.
https://www.jegs.com/i/Derale/259/13402/10002/-1
__________________
Jim Moshier 1971 Grand Prix 462ci SD Performance 6x heads 1962 Catalina 389 1968 Firebird 400-455 I haven't decided "If we ever forget that we're one nation under GOD, then we will be a nation gone under." - Ronald Reagan |
#3
|
||||
|
||||
Here’s a thread on how I did mine. It’s in sequence after the radiator cooler as Jim mentioned. It’s a stacked plate as well. I put it up front for better air flow, plus it also keeps it hidden.
https://forums.maxperformanceinc.com...7&postcount=21
__________________
Ken '68 GTO - 464 - Ram Air II heads - 236/242 roller - 9.5” TSP converter - Moser 3.55 Truetrac (build thread | walk around) '95 Comp T/A #6 M6 - bone stock (pics) |
The Following 2 Users Say Thank You to Verdoro 68 For This Useful Post: | ||
#4
|
|||
|
|||
Quote:
|
The Following User Says Thank You to Tom Pugh For This Useful Post: | ||
#5
|
|||
|
|||
so, my next question is; how do I remove the condenser to access the area in front of it? My car is a factory air car and it has the panel installed between the radiator support and the front bumper so I can't go in through the bottom.
|
#6
|
||||
|
||||
I know ‘68 is completely different, but I didn’t have to remove the condenser to install mine. I dropped the valence, which I guess would be the bumper in your case, and pulled the right side grille for access. The lines run through the opening in the core support for the right side bumper bracket.
__________________
Ken '68 GTO - 464 - Ram Air II heads - 236/242 roller - 9.5” TSP converter - Moser 3.55 Truetrac (build thread | walk around) '95 Comp T/A #6 M6 - bone stock (pics) |
#7
|
|||
|
|||
Quote:
|
#8
|
||||
|
||||
Derale cooling pan
I just add one of these.
__________________
“Nothing in the world can take the place of persistence. Talent will not; nothing is more common than unsuccessful men with talent. Genius will not; unrewarded genius is almost a proverb. Education will not; the world is full of educated derelicts. Persistence and determination alone are omnipotent. The slogan Press On! has solved and always will solve the problems of the human race.” ― Calvin Coolidge |
Reply |
|
|