View Full Version : Super Duty Performance ROCKS!!
I had Dave do my heads and Warrior intake.#62 Heads flowed 280/199. He did awesome work, very professional and very helpful. I would highly reccomend to anyone needing headwork or any other enginework. Now if the weather was nicer..... /infopop/emoticons/icon_razz.gif
1967 GTO 400 4-speed (416) #62's 11:1 solid lifter 6.8 Eagle/Ross 11.87@115 (w/mufflers)-->so far!
I had Dave do my heads and Warrior intake.#62 Heads flowed 280/199. He did awesome work, very professional and very helpful. I would highly reccomend to anyone needing headwork or any other enginework. Now if the weather was nicer..... /infopop/emoticons/icon_razz.gif
1967 GTO 400 4-speed (416) #62's 11:1 solid lifter 6.8 Eagle/Ross 11.87@115 (w/mufflers)-->so far!
Jack Ferris
10-31-2002, 08:39 PM
I will have to agree. Dave did a set of Eheads for my 482 project. The workmanship as well as the flow #'s were superb. If anybody is looking to get head word done SD is the place.
Wang whats with all the pictures it a parking lot.....
sscherin
11-01-2002, 09:42 AM
Yup.. Dave did my 6X heads.. 260/200 CFM.. picked up 1/2 a second in the 1/4 and 5mph with them and the new cam he picked out.
http://www.sdperformance.com
Scott Schering
70 Firebird 455 12.34 @ 108.2
Http://www.pontiacs.org
Ponti
11-18-2002, 10:34 PM
Yeah Dave is the man! He set me up with a set of 6x#4 heads, ported and complete for a better price than I originally thought after reading several other posts about similar work done by other Machine shops! He even threw in a new set of push rods for free after everything was paid for. Highly recommend! Great guy.
Getting a hold of himsometimes can be a PITA, but thats because he's always busy, and had very little help at teh shop. Still worth it though.
2FAST4U
12-09-2002, 07:58 PM
Dave's the BOMB!!! /infopop/emoticons/icon_cool.gif
Thats My Story and I'm Sticking To It!
bondobates
01-01-2003, 11:18 AM
Has anybody been to his shop? I am also looking at having some work done. He is within a couple of hours from my house. Would like to visit. Everyone seems to have good reports.
Thanx
sscherin
01-01-2003, 12:48 PM
I've been up there twice now..
He holds an open house every year in Feb or March..
Just give him a Call and see if it's ok to stop by for a look around.
GURU: One who knows more jargon than you
Scott Schering
70 Firebird 455 12.34 @ 108.2
Http://www.pontiacs.org
Rugratman
01-09-2003, 12:09 PM
Is he in Canada ?
Did you send your heads to him by frieght ?
How long did it take ?
How much was frieght ?
Looking for someone local to me ( Maryland ).
Very hard to find. Everybody's chevy this or Ford that......
Makes my skin crawl.
Rusty
67GTO
Lee Hewell
01-09-2003, 02:56 PM
Rugratman, try Brandywine Cylinder Heads. I haven't been there for many years but I think they are near New Oxford, Pa. It's not too far from you.
Rugrat,
Yes he is in Canada, but he uses a United States shipping address (he is just across the border). It cost me $90 to ship from Montana, but I made small wooden crates for each head, so they weighed a bit more. It took him about two months and he did an awesome job! I highly recommend Dave. http://forums.performanceyears.com/groupee_common/emoticons/icon_cool.gif Oh, I sent them UPS ground. UPS has 150 lb. limit
1967 GTO 400 4-speed (416) #62's 11:1 solid lifter 6.8 Eagle/Ross full exhaust 11.87@115---> UPDATED, heads race ported (287/200) and extras; shooting at low 11's in the spring