64-67 Z-bar/ clutch pedal repair bushings
 

64-67 Z-bar/ clutch pedal repair bushings these flange bushings repair the wearable egg shaped holes & saw cut ends of your worn clutch linkage . $25.00 for 3 pcs.

5 sets available 7 sets sold

Do you have a pic of the bushings?

PM sent

Pm & email sent.

Will repair other years with 5/16" ends / holes . 4 sets left

PM sent.


Sent from my iPhone using Tapatalk

The repair bushings go in the holes [2]on the countershaft[z-bar] & 1 in the clutch pedal hole. If your 3 holes are elongated from wear it takes the slop out & the bind from metal to metal . Generally the male ends of the countershaft get a cut mark in the ends as does the clutch adjustment rod . You would weld the cut mark & file fit it to fit the new bushings & drill [3/8] the 3 holes to accept the repair bushings& put a dab of good grease Very smooth pedal feel.

Bump

$30.00 3 pcs. shipped with USPS & tracking / delivery confirmation.

Plenty in stock with excellent feedback.

???
Also, what material are the bushings made of?

Oilite Bronze with flange .

Interested as I was about to order a new Z-Bar due to it having an elongated hole.
Mind sending me some pics of the bushings?

Is welding 100% required?

emailchristian (at) gmail (dot) com
Thanks!

The elongated holes would need to drilled to 3/8" to accept the repair bushing , check both holes on zbar & the clutch pedal hole as well . Welding is only required to fix the male ends on the zbar linkage from the pedal to zbar ends & clutch adjustment rod end . Also makes a nice smooth pedal feel . email sent.

[email protected] is not a good email / failed to deliver

That is because you forgot the word "email" in front of it :beerchug:
Don't worry, you aren't the first to do this.

Bump

Bump

Still avail.

$30.00 3 pcs. shipped with USPS & tracking / delivery confirmation.

Bump

Bump

Interested. PM sent.

Could i get pics of these? I'm interested in multiple sets.

Either here, pm here, phone 908.208.7778, or email [email protected]

Thanks

Are these the same Hurst used to sell? I have a bunch of these at one time

No they are not the proper size , Hurst was for the shifter to trans arms / mine are for the 2 holes in countershaft & clutch pedal hole .

Limited inventory & availability

Available

Bump

Bushings
 

I'll take a set, pm me with payment info. Thanks, Bob.

Put my name on a set. Send payment details to [email protected].
Mark

A few sets left.

I'll go ahead and get a set. I had all my linkage gone through bushed/brazed years ago but looks like its getting worn again.

Will you PM me with details on how to purchase?

Bushings are back in stock.

Hello

Any issue with sending these to Canada? and do you accept Paypal?
Thanks
Trevor

Paypal yes shipping to Canada would cost more , send a PM .

Bump

Fits 5/16 [0.3125] ends only set of 3 $30.00 shipped USPS with tracking & delivery confirmation.