does anyone know what the line pressure (to the trans cooler) is for a TH350?

thanks.

does anyone know what the line pressure (to the trans cooler) is for a TH350?

thanks.

The dyno sheet for my TCI TH350 lists cooler pressure as 1 gpm & 25 psi at 2000 rpm in high gear.

Here is the normal specs for a th350:
Nuetral 1000 rpm 55 to 75 psi
Low or D2 1000 rpm 85 to 110 psi
Drive 1000 rpm 60 to 90 psi
Reverse 1000 rpm 85 to 150 psi

PROBRD, I think those are the pump output pressures. The supply to the external cooler comes off the "dump" port of the pressure regulator and is a lot lower pressure.