PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   66-67 GTO Tempest & LeMans TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=430)
-   -   Consol/Shifter (https://forums.maxperformanceinc.com/forums/showthread.php?t=421392)

Inherit67 03-24-2001 11:24 PM

Help Guys I'm at a standstill! How do you remove the black shifter knob so you can get console out of car. I have tried unscrewing the knob but this still will not remove it. I can get the indicator plate (cover) to slide toward the back a bit, does that mean anything? I need to wrap this up this weekend so any help is much needed. Thanks, JR

Inherit67 03-24-2001 11:24 PM

Help Guys I'm at a standstill! How do you remove the black shifter knob so you can get console out of car. I have tried unscrewing the knob but this still will not remove it. I can get the indicator plate (cover) to slide toward the back a bit, does that mean anything? I need to wrap this up this weekend so any help is much needed. Thanks, JR

Kurt Zimmerman 03-25-2001 10:43 PM

JR,
I'm pretty sure that bad boy unscrews counter-clockwise. Every shifter knob I've run into does.
Kurt

------------------
"folks nowdays just don't do nothin', simply for the love of it..."
Don Henley

Ccass 03-26-2001 12:02 PM

On Pontiacs with the button in the middle, it may require the removal of a little c clip.

jyeager 03-26-2001 05:57 PM

I'm not sure about the '67 model, but like ccass said, you should pop out the button in the top of the knob using a flat-bladed screwdriver. After it's popped out, you will be able to remove the snap-ring that retains the shifter knob.

------------------

Inherit67 03-27-2001 12:55 AM

Thanks Guys. Its always the little things that trip me up. The little chrome button on top unscrews also. ( hard to believe that I am a 9-level aircraft mechanic in our USAF) After that delay things have gone smooth, some rust in floorpans but it was an easy fix. Thanks for the help, I'll be back!


All times are GMT -4. The time now is 03:57 AM.