I drove 35 miles to the chassis dyno yesterday and put down 730 RWHP. This was on 110 octane fuel with open pipes. Last year it made about 600 RWHP on pump gas and ran a 10.58 sec quarter mile. I should have new quarter mile times in a few weeks.

Some specs:

463 cubic inches
two T04B 60-1 turbos
Water/Air intercooler
FAST fuel injection
Victor intake
Eagle rods
custom JE pistons
steel 4-bolt mains

Another pic

Aewsome #'s!

I love the look of that setup.

That is great! http://forums.performanceyears.com/g...icon_smile.gif

what year firebird 77-81???

Fascinating upper-hose route.
Fascinating Air cooler.

What Heads & Piston dish?

That is one of the most impressive turbo setups I have ever seen. Happen to have any more pictures with closer detail?

Awesome. I love that radiator hose!

WHERE CAN WE GET ONE?
You are quite a fabricator! The exhaust manifolds and the inner cooler look wicked.

Holy Crap !
What a stout set up, over 700 hp at the wheels !
Bet it sounds downright evil
Like others said, the fabrication work looks great.
Do you have FAA approval ? http://forums.performanceyears.com/g...on_biggrin.gif

That's is SWEETTTTTTTTTTTTTTTTT !!!

Great numbers, should be a wild ride!!!!

Awesome ride--very nice--Trans Am Kahuna was planning to build something like that for the http://www.silverstateclassic.com http://forums.performanceyears.com/g...icon_smile.gif http://forums.performanceyears.com/g.../icon_cool.gif.

Quite an improvement for sure. Looks like the 60-1s did the trick. You kept your same turbines correct? At what psi did you make those numbers? How much torque?

Great Job, Glad the 60-1s worked like I hoped they would.

Awesome installation too. That looks like a serious water to air deal you have there.

What bricks did you use?

Tom V.

OK, what color are you painting the car? I want to know who NOT to pick on at the stop light. http://pysales.com/images/spank.gif

Way cool.

Awesome power numbers. What heads and what were the boost numbers, RPM's?
What are the cam specs?

excelent job!

Nice numbers, its good to see someone pull off the twin turbo set up that they made!!

Since you did a lot of the mock up yourself you should considering making that setup along with a single turbo set up on the passenger side. I am sure after seeing your numbers guys will come around to doing turbos.

What size injectors are you running?

That sure is puurrrrty http://forums.performanceyears.com/g...on_biggrin.gif.....Awesome numbers too by the way!!!!!!!!!!!