Anyone know of a product that works well to replace the factory mastic used between the hood inr and otr panels?

Anyone know of a product that works well to replace the factory mastic used between the hood inr and otr panels?

All I know is that you want something that stays soft and plyable, If it sets up hard it will wrap the crap out of the sheetmetal when it expands and contracts.
http://forums.performanceyears.com/g.../icon_cool.gif http://forums.performanceyears.com/g.../icon_cool.gif

http://kurtspontiac.homestead.com/Pre1964Pontiacs.html

Liquid Nails

practice
practice
practice

then try it

"tbdET/1xxMPH/1.xx 60foot/28"/3.54:1/10"/469 #48/Flat HYD/DualQ-Jets/Offyl/3xx0Lbs
11.00/123MPH/1.50 60foot/29.5"/4.10:1/10"/469 #48/FlatHYD/DualQuad/Wenzler/3250Lbs
12.00/112MPH/1.61 60foot/26"/3.31:1/10"/469 #48/FlatHYD/Q-Jet/Torker/3650Lbs
12.70/103MPH/1.71 60foot/28"/4.10:1/12"/469 #48/FlatHYD/Q-Jet/Torker/3950Lbs"

Liquid Nails appears dry, but it will bubble-up most paints.

FWIW 3M black weatherstrip adhesive also bubbles-up car paint.

The alternate idea: I tried Dum dum..does not hold under tension if the plys are gapped away.

"tbdET/1xxMPH/1.xx 60foot/28"/3.54:1/10"/469 #48/Flat HYD/DualQ-Jets/Offyl/3xx0Lbs
11.00/123MPH/1.50 60foot/29.5"/4.10:1/10"/469 #48/FlatHYD/DualQuad/Wenzler/3250Lbs
12.00/112MPH/1.61 60foot/26"/3.31:1/10"/469 #48/FlatHYD/Q-Jet/Torker/3650Lbs
12.70/103MPH/1.71 60foot/28"/4.10:1/12"/469 #48/FlatHYD/Q-Jet/Torker/3950Lbs"

Thanks 1/2". Seems like an open market. Gotta be lots of hoods that could use the same help.

I haven't tried this stuff but it is from Fusor so it must be OK. The description sounds like what is needed for a hood or trunk panel.

anti-flutter foam from Fusor

Keith

Thanks Keith, this stuff looks promising!