Second Gen Firebird Sheetmetal
 

Full rear qtrs and inner rear qtrs would be nice to see reproduced. Anyone know if there out there yet?

cant tell you how many 2nd gen birds get trashed because the tail pannel is gone, what a shame and LOSS of market for the resto companys

I have seen recently that the tail light panel is being reproduced by Goodmark Industries for 74-78. Not sure about 79-81???

Sure could use rear quarters, rear body panel, trunk extensions, outer wheel houses and correct fenders for 1970-1973 Firebirds/T/A's. A good repop of the wheel flares that fit decently would be a big help also. There has to be a HUGE market for those.

seen on the new show on Spkie, muscle car that you can buy a late 60's camaro body repop, they say it was suppose to be 100% exact on the orginal repop, so I ask why not firebirds,T/a's,GTO's, or anyother car that peopel are building,,I do wonder about how you title it?

I am so waiting for these parts... trunk extensions 1st cough cough.......

About six months ago I emailed Goodmark and asked if there were any plans to release full quarter panels for 70-73 firebirds. The answer was they were not producing them and had no plans to. I don't get it, 67, 68, 69 birds are all one-year quarters and they make them. And they even have a full quarter for an Olds cutlass convertible. The 70-73 firebird quarter panel fits four years of cars! And tail panels, heck used ones go for big bucks, they would sell a ton of them. Trunk drop offs too. WAKE UP GOODMARK!

I would also appreciate some decent second generation sheet metal.... more specifically, some rear quarters for my 78 T/A!


db

I got half a car for $100 - then all the drilling of the spot welds etc which sucked major! Gotta 2nd this request!

Front fenders would be nice too !!

I agree with 3tas4me & eaglesan13, we need '70 - '73 full quarters, rear body panel (inner and outer), correct fenders, etc. - especially the rear body panels. ;-)

I noticed the trunk pan for '71's is no longer in the catalog. Have they been discontinued?

The 70-73 trunk pans are still available, PY part #-RFT11A.

me too on the correct (not camaro, not 74-81) 70-73 trunk extensions and rear panel--at least the lower section (below the fiberglass tail panel) like they sell for Camaros. Every one I have seen is swiss cheese. I can live with the qtr "skins" only, but you can't replace them without fabbing your own inner pieces first.

We need '70 - '73 full quarters, rear body panel (inner and outer), correct fenders, etc. - especially the rear body panels. I need two sets, I talk to Goodmark to and asked if there were any plans to release full quarter panels for 70-73 firebirds. The answer was no and no plans to. they told me to buy the camaro ones, NOT they would sell a ton of them. Trunk drop offs too. WAKE UP GOODMARK!