PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac Business Entities Exchange (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=469)
-   -   Time To Upgrade (https://forums.maxperformanceinc.com/forums/showthread.php?t=474525)

Logan Cade 04-09-2006 12:06 PM

Time To Upgrade
 
I have a 69 GP and it’s time to upgrade to a 455. I’m looking for a knowledgeable and reputable Pontiac engine builder in the Illinois/Wisconsin area. Anyone have any recommendations?

INJUNTOM 04-11-2006 04:38 AM

bound to be some closer, but Kauffman racing equipment is in Ohio

rlfonad 04-11-2006 11:02 PM

Baril Engine in Green Bay...
 
I don't know how far north you want to look, but I just fired up a 455 that Baril Engine in Green Bay did for me. Absolutely great. I followed Jim Hand's book and had Baril do everything they needed to get to 10.3:1 compression and around 500 hp. I did thrust them and pretty much gave them an open check book, but I wanted it done right.

The only thing I ran into was the Pontiac blue paint burning off. I think it was the fact I had Baril use a rattle-can paint, which he applied over a hi-temp primer. He is standing behind it and the paint supplier is sending a free can of brush-on to fix the problem... Just a heads up.

If you want to talk with them, ask for Larry at 1-800-236-8212. He's a good guy and a great shop, but he's very busy right now and I don't know how long it would take to do your build.

I hope this helps and good luck in your search.

Ron :drive:

INJUNTOM 04-17-2006 02:18 AM

Quote:

Originally Posted by rlfonad
The only thing I ran into was the Pontiac blue paint burning off. I think it was the fact I had Baril use a rattle-can paint, which he applied over a hi-temp primer. He is standing behind it and the paint supplier is sending a free can of brush-on to fix the problem...

if you are talking about the paint on the exhaust ports, i don't think you'll ever keep that from burning off...

rlfonad 04-17-2006 09:01 PM

:sorry: Sorry to hi-jack this post, but yes...INJUNTOM. The problem is the motor had less than an hour of breakin running time and the paint came off ...bigtime.

I talked with Bill Hirsch and he sent me quart of paint-on Pontiac blue. He seems to be a great guy. I would highly recommend his products...he definately stands behind them. He said the paint-on holds up much better.

I am trying to get 500 miles on the rebuild than will do a touch up.

Sorry again Logan Cade for the intrusion! Ron

cutrone 04-19-2006 05:16 PM

hey Logan call,

Wayne Shicantec.
Shicantec Performance Mil Wisc. 262-966-1428
let me know if you need anymore info.

Bernie


All times are GMT -4. The time now is 06:07 PM.