PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac Business Entities Exchange (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=469)
-   -   Good shop in Oregon (https://forums.maxperformanceinc.com/forums/showthread.php?t=482827)

66CATCONV 06-23-2006 01:35 PM

Good shop in Oregon
 
Hello,

First time poster here, hope you folks can help me out. I am looking for a shop in Oregon that you would trust with your Pontiac. I have used the CarTalk recommended shops and have been burned bad. Guys who wrench on mostly newer cars have done some real harm to my Catalina. Currently I need to replace the clutch and have someone who knows what they are doing go over the shift linkage and pedal assembly and make sure everything is right. Idealy the shop would be within 50 miles or so of Dallas (near Salem). Thanks for any leads!

Rick Rosen 06-23-2006 01:58 PM

Go to www.northwestlegends.com and you can hook up with the a bunch of guys who know the where to go in Oregon.

fastgto 06-23-2006 05:45 PM

This is the website for the G.T.O. club in Oregon. These fine folks can help you out. www.goatherd.com

BOB VIDAN 06-25-2006 01:36 AM

You might contact Ron Anderson at 360-910-5449. He has a shop in Vancouver and knows Pontiacs inside and out. He has a 4 speed 64 GP himself along with a race car or 2. Should be able to help you out. His shop is in Vancouver, WA.

66CATCONV 06-28-2006 03:14 PM

Oh come on
 
Thanks to the posters offering club links and an out of state shop. Is there no one on this board who has taken their Pontiac to a shop in Oregon and has good things to say about the experience?

BOB VIDAN 07-01-2006 12:22 AM

HELLO, one more and the last time, call Ron Anderson at the above number. He is, as of tonight, in California at the POCI National meet. He CAN help you and is most credible.

Ken -Ace- Brewer 07-02-2006 11:03 PM

I was going to put up a post about RON ANDERSON!! DO NOT do buisness with the man! He bought parts from me for a few years! Always paid. Was a great customer! Then made a big order and NEVER paid! The guy is a deadbeat and a crook! I call him and he will not answer his phone!! I was at the POCI! I NEVER seen him! Until he pays me I will speak ill of him all I can! If he can't pay his bills I would avoid him!!
Be Cool,
Ace
PS ....Might I add I have sent him over a dozen letters and several phone mesages! And he has owed for over 2 yrs!! He must have caller ID!!

RR67GTO 07-03-2006 10:43 PM

NOt sure of the shops name, but on SE 122 nd Street in Portland is a Restoration shop with beautiful cars inaide they have done. However, when doing normal restorations, they will not even give any kind of a price range, and two I know who used them ended up getting really cleaned out. Not just high, but down right robbery. They have some of the big dollar Mopars they do, but also get enormaus amounts of money for their work. One guy took in two pieces of window molding just to be polished, not retored. It cost him $375.00, and I had mine restored and polished for $125.00 by a local Portland guy. BUt then, I bought my parts from Bob V I believe so they were already real decent. Thanks Bob !! Mike.

fastgto 07-04-2006 05:19 PM

Ken, that`s good you posted your problem with this fellow. Ripping somebody off for parts or money is as low as one can go.

66CATCONV 07-05-2006 06:34 PM

Anybody from Oregon?
 
Don't need a high-end restoration shop. Just a decent place to have some work on my car done that has some old guys who know how to wrench on old american iron.

Ken -Ace- Brewer 07-18-2006 10:31 AM

GOOD NEWS!!! I guess he reads this site!! LOL!!!!
Ron has sent payment!!
Be Cool,
Ace


All times are GMT -4. The time now is 11:59 PM.