Pontiac Business Entities Exchange Sources, Compliments and Grievances in regard to Pontiac parts or services rendered by an individual or business.

          
Reply
 
Thread Tools Display Modes
  #1  
Old 06-23-2006, 01:35 PM
66CATCONV 66CATCONV is offline
Junior Member
 
Join Date: Jun 2003
Posts: 3
Default Good shop in Oregon

Hello,

First time poster here, hope you folks can help me out. I am looking for a shop in Oregon that you would trust with your Pontiac. I have used the CarTalk recommended shops and have been burned bad. Guys who wrench on mostly newer cars have done some real harm to my Catalina. Currently I need to replace the clutch and have someone who knows what they are doing go over the shift linkage and pedal assembly and make sure everything is right. Idealy the shop would be within 50 miles or so of Dallas (near Salem). Thanks for any leads!

  #2  
Old 06-23-2006, 01:58 PM
Rick Rosen's Avatar
Rick Rosen Rick Rosen is offline
Senior Member
 
Join Date: Oct 2001
Location: Redmond, WA USA
Posts: 125
Default

Go to www.northwestlegends.com and you can hook up with the a bunch of guys who know the where to go in Oregon.

  #3  
Old 06-23-2006, 05:45 PM
fastgto fastgto is offline
Senior Chief
 
Join Date: May 2004
Location: Langley B.C. Canada
Posts: 415
Default

This is the website for the G.T.O. club in Oregon. These fine folks can help you out. www.goatherd.com

  #4  
Old 06-25-2006, 01:36 AM
BOB VIDAN BOB VIDAN is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Vancouver, WA
Posts: 3,123
Default

You might contact Ron Anderson at 360-910-5449. He has a shop in Vancouver and knows Pontiacs inside and out. He has a 4 speed 64 GP himself along with a race car or 2. Should be able to help you out. His shop is in Vancouver, WA.

  #5  
Old 06-28-2006, 03:14 PM
66CATCONV 66CATCONV is offline
Junior Member
 
Join Date: Jun 2003
Posts: 3
Default Oh come on

Thanks to the posters offering club links and an out of state shop. Is there no one on this board who has taken their Pontiac to a shop in Oregon and has good things to say about the experience?

  #6  
Old 07-01-2006, 12:22 AM
BOB VIDAN BOB VIDAN is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Vancouver, WA
Posts: 3,123
Default

HELLO, one more and the last time, call Ron Anderson at the above number. He is, as of tonight, in California at the POCI National meet. He CAN help you and is most credible.

  #7  
Old 07-02-2006, 11:03 PM
Ken -Ace- Brewer's Avatar
Ken -Ace- Brewer Ken -Ace- Brewer is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: San Pedro, Ca, USA
Posts: 1,504
Send a message via Yahoo to Ken -Ace- Brewer
Default

I was going to put up a post about RON ANDERSON!! DO NOT do buisness with the man! He bought parts from me for a few years! Always paid. Was a great customer! Then made a big order and NEVER paid! The guy is a deadbeat and a crook! I call him and he will not answer his phone!! I was at the POCI! I NEVER seen him! Until he pays me I will speak ill of him all I can! If he can't pay his bills I would avoid him!!
Be Cool,
Ace
PS ....Might I add I have sent him over a dozen letters and several phone mesages! And he has owed for over 2 yrs!! He must have caller ID!!

__________________
Am I glad I got out of the business I was in? HELL YEAH!!!

Last edited by Ken -Ace- Brewer; 07-02-2006 at 11:16 PM.
  #8  
Old 07-03-2006, 10:43 PM
RR67GTO's Avatar
RR67GTO RR67GTO is offline
Ultimate Warrior
 
Join Date: Feb 2001
Location: Clackamas, OR. USA
Posts: 1,884
Default

NOt sure of the shops name, but on SE 122 nd Street in Portland is a Restoration shop with beautiful cars inaide they have done. However, when doing normal restorations, they will not even give any kind of a price range, and two I know who used them ended up getting really cleaned out. Not just high, but down right robbery. They have some of the big dollar Mopars they do, but also get enormaus amounts of money for their work. One guy took in two pieces of window molding just to be polished, not retored. It cost him $375.00, and I had mine restored and polished for $125.00 by a local Portland guy. BUt then, I bought my parts from Bob V I believe so they were already real decent. Thanks Bob !! Mike.

__________________
Build it fast, build it right, hold On TIGHT !!!
  #9  
Old 07-04-2006, 05:19 PM
fastgto fastgto is offline
Senior Chief
 
Join Date: May 2004
Location: Langley B.C. Canada
Posts: 415
Default

Ken, that`s good you posted your problem with this fellow. Ripping somebody off for parts or money is as low as one can go.

  #10  
Old 07-05-2006, 06:34 PM
66CATCONV 66CATCONV is offline
Junior Member
 
Join Date: Jun 2003
Posts: 3
Default Anybody from Oregon?

Don't need a high-end restoration shop. Just a decent place to have some work on my car done that has some old guys who know how to wrench on old american iron.

  #11  
Old 07-18-2006, 10:31 AM
Ken -Ace- Brewer's Avatar
Ken -Ace- Brewer Ken -Ace- Brewer is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: San Pedro, Ca, USA
Posts: 1,504
Send a message via Yahoo to Ken -Ace- Brewer
Default

GOOD NEWS!!! I guess he reads this site!! LOL!!!!
Ron has sent payment!!
Be Cool,
Ace

__________________
Am I glad I got out of the business I was in? HELL YEAH!!!
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:00 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017