PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   68-69 GTO Tempest & LeMans TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=433)
-   -   1968-1972 Rear Window Trim (https://forums.maxperformanceinc.com/forums/showthread.php?t=637480)

463gtojl 06-29-2010 05:50 PM

1968-1972 Rear Window Trim
 
Hey guys, I would like to know if the rear window trim for 68-72 GTO's are all the same? If so, do any of you guys on here have any laying around? I need one for a 1968 GTO. Thanks. I seen the ones on Ebay but they are over $200...

webfoot 06-29-2010 05:58 PM

68-72 A-body is all the same. Someone may have a set in here but there is also a "wanted" section of the forum which you may have better luck.

463gtojl 06-29-2010 06:05 PM

Quote:

Originally Posted by webfoot (Post 4030109)
68-72 A-body is all the same. Someone may have a set in here but there is also a "wanted" section of the forum which you may have better luck.

I wouldnt say "A body" because the shop where the car is at, the owner has a 1972 Chevelle and the trim isnt even close... He was just going to give me his but it does not fit.

Looks as if it will have to come from a 68-72 GTO. Thanks though

marxjunk 06-29-2010 06:46 PM

i have a set pretty decent 100 bux plus shipping..off a 68

463gtojl 06-29-2010 06:57 PM

Quote:

Originally Posted by marxjunk (Post 4030132)
i have a set pretty decent 100 bux plus shipping..off a 68

You have PM

marxjunk 06-30-2010 03:35 PM

Quote:

Originally Posted by 463gtojl (Post 4030139)
You have PM

pics and pms returned..

68pongto 06-30-2010 11:30 PM

I think it is also just 68-72 GTO, Lemans, Tempest 2-doors. 4-doors different. I know Cutlass is different, and I think Chevelle too, its been some time since I compared the two.

codyyy 07-01-2010 01:19 AM

I'm not real sure, I took all the trim from a '68 Tempest 4-door at the junkyard because I might need spares or whatever, it looks like it will line up. At like 45 cents a piece I couldn't go wrong.

68pongto 07-01-2010 12:05 PM

I have a 4-door, It's different, it won't line up.

codyyy 07-01-2010 12:11 PM

Quote:

Originally Posted by 68pongto (Post 4031716)
I have a 4-door, It's different, it won't line up.

Will any individual pieces line up or just the whole thing won't?

marxjunk 07-01-2010 01:48 PM

i shipped your moldings Jimmy...

68pongto 07-01-2010 10:02 PM

4-door rear window trim is squared off in the upper corners, the lower corners have big curves. None of it interchanges with 2-door!

marxjunk 07-01-2010 10:57 PM

Quote:

Originally Posted by 68pongto (Post 4032183)
4-door rear window trim is squared off in the upper corners, the lower corners have big curves. None of it interchanges with 2-door!

it does if you have a hammer....


All times are GMT -4. The time now is 02:09 PM.